Review on Enhanced Moroso 85474 Air/Oil 🔍 Separator Catch Can for Universal Application by Tom Beland

After repairing my 2.7 liter Tacoma engine that had driven 202 miles, the inside of the throttle body, air intake and air intake were covered in black goo and I needed some time to delete them. Having done this, I wanted to protect my investment (and my design) as much as possible, so I bought this product. The kit comes with all the accessories pictured but I changed the brass fittings from the original 3/8 inlet to 1/2 as another customer did in the Revain reviews. Placement in my particular case was easy, I used an aluminum L bracket and cut it to size, then drilled 2 holes in the back to accommodate the glass holder provided and is held in place with 2 socket head screws. I didn't have to drill any holes in the car as there was already a hole from the factory. I attached the rubber hoses (also included) to the nozzles and then attached them to the can. I put the glass in the holder and measure the length needed, then I cut it. When I was done, I tightened everything up and did a wobble test to make sure there was no tinkling or clanking from metal to metal contact. I started the car and checked for vacuum issues and codes. Only time will tell how it performs but for now I'm really happy with the fit and finish. The hose clamps fitted in the picture cannot be seen, I added them when everything was fine.