100PCS Door Panel Retainer Clips Replacement For Jeep Grand Cherokee, Chrysler Cirrus Voyager Dodge Grand Caravan Stratus - OEM #6503204 By GOOACC Review

Yeah that's right .I am a bad ass. (industry Term), I was down to my last $3.25 and was itch'n for a Forty.but no then it hit me.where would I be without a bag of, no less than 40, Nylon Bumper Retainers. That's right fans, you know the deal.I spent my wad on a bag of high quality Nylon Bumper Retainers, just in case the duct tape failed on one one of my door panels. Fabulous for sure. It simply blows me away how they could have made them all, not only the same color, but the same size.right…

I often loose or break these when working on my atvs. These came in handy to replace those lost or damaged ones. The quantity is great because I had plenty on hand for the future no complaints here

This product it too big. Even though the description stated is for my car. My car bumper and engine cover needed few of these, but after installing them, the parts still loose and not fastened. Make sure the two pcs you want to attach/fastened are thicker then bumper or engine cover plastic.

I initially bought these for replacement on my UTV. I have actually used these on a few side projects as well That's my review!

Got a bag of 40 on here for less than the dealer charges for 2 plugs, no brainer. Application vehicle is a 2008 Acura MDX that lives in the midwest so each time I do maintenance at 8 years of age the plugs are starting to break, vehicle is starting to show its age. These were a great addition to my tool box to end parts runs to the dealer or auto part store to finish a job, now I have the needed plugs on hand.

Works as advertised. I used them on a Honda atv and the head of them is bigger than the stock ones but seems to be more sturdy as well.

I just installed 27 of these rivets in the engine compartment of my 2009 Nissan 370Z. Not one broke. Not one didn't work. Not one didn't hold. Way out performed my expectations! I didn't realize how old, loose and brittle the old rivets were until I replaced them with this exceptional fitting - quality. product. I now it sounds like i'm working for the manufacturer but, when I come across quality in today's market, I like to let everybody know.

Bought this to replace my broken fasteners for my Jeep. They were easy to install. I like that they have more access to the middle fastener than my OEM ones. We will see how long they last but I'm content.

I bought a used four wheeler a few weeks ago and the spots where the rivits should be had old rusty bolts and nuts in it's spot. I ordered those and changed them out and just that alone made my fourwheeler look slot better.

The Znder Nylon Fasteners are perfect for attaching mud flaps to pliable fender liners. Drill an 1/8th inch hole through your mud flap center; locate the position of the mud flap on the car; insert one side of the fastener into the pliable liner; insert the other side of the fastener through the mud flap and snap into place against the liner. A second or third Znder Nylon Fastener should be applied to keep the flap from rotating off perpendicular to the deck. May also be secured with adhesive…

I’ve been struggling to find the correct sized bumper fasteners for my 2016 Nissan Altima. They either didn’t stick or fell off predictably. Finally-these fit PERFECTLY and my bumper should be intact as a result!

Fit my 2004 Nissan Maxima SE perfectly. They provide a more snug fit than the originals. The only knock is that the top head of the center pin is very thin, which makes removing them a bit more difficult. That being said, I have removed plenty that have already been installed and they haven’t broken yet. These are much, much less expensive than what the dealership or local auto parts store will sell you. Also, you get more than enough in one bag. Plenty to replace the ones that get removed lost

GOOACC Nylon Bumper Fastener Rivet Clips were purchased for a 2003 Toyota Tacoma repair job. They fit in the original fastener holes and held everything together with no issues.Recommend

I'm glad that all of the originals were still re-useable, because these didn't fit, so the suggested size is wrong. I kept them, because I have other plans for them where I will be drilling the correct size holes

These push pins fit the underbody of the 2010 Prius perfectly, for holding on the plastic splash shield (see caveat below). Excellent purchase, highly recommended.IMPORANT!The Prius uses TWO sizes of push pins! These pins fit the LARGE holes perfectly, and work well when a pin goes through multiple layers of plastic. However most of the underbody holes require a SMALLER pin! Revain sells the following push-pins which I use to fit the SMALLER, more numerous holes perfectly…

I bought these to replace some fasteners under my hood on my Honda Fit. These fit perfectly, better than the ones I bought from autozone that fell out on the first day. Now I just have to figure out what to do with the extra 34 fasteners.

I needed to replace some broken fasteners when I installed the splash guards on my 2005 Forester XT. These are high quality OEM replacements and replace some of the fastening clips that require the use of a screwdriver, which more often than not will strip out and create a lot of frustration. These have a nice slot to get a flat head screwdriver into to undo the fastener if necessary.

Had a few old rivet clips on the UTV that had been removed and reinstalled a few times so thought I'd pick these up to replace them. Popped the first couple in and it looked like a good fit and a smoother finish on top than the factory ones. Problems started when I went to remove a clip to check panel alignment before putting the post in, with hardly any removal pressure one side of the retaining arm tore off. Okay, maybe just a bad clip. I move to the rivet clip right next to it that I'd just…

Bought these to replace some broken retainer pins of the same design for the front grille of my car. Going to the dealer was an absolute shock. They wanted $4 A PIN! These ones, while not the same high quality as the dealer's part, will achieve the same result for a fraction of the price.I can imagine replacing these in a couple of years from getting brittle with exposure to the elements, but I can live with that.Since putting these on to retain the grille, I have also used these to do a custom

These come separated, so there are actually 40 of each piece. I like to make that clear because so many vendors overstate the situation. Well made and only a couple of incomplete castings. Good purchaseFull story: I had to remove the front fender lining on my older car to get to the fuel system, and then found I needed to buy parts. That night we had a wind storm which blew away all of the fasteners. I ordered these and they just snapped right into place. I can easily see why the car…