40000 Lumens LED Bulbs Combo - SEALIGHT X2 H11/H9/H8 Low Beam 9005/HB3 High Beam, 6500K Cool White Halogen Replacement Kit Review

Purchase this product from my 2016 Nissan Sentra SV. My Nissan has an h9 for the high beam and an h11 for the low beam. The manufacturer stated that this model will fit both high beam and low beam and that's not true. I had no problem using them in the high beam by inserting them and twisting to lock them in place. When I tried to put them in the low beam i couldn't push it all the way through to twist it to lock it in place. I was struggling for 30 minutes still did not work. The grooves were…

Arrived on time, well packaged. I really like the fact this was a complete kit (low/high/fog) lamps at a competitive price which made choosing them over other brands easy. Installation in 2017 F-150 is a bit fiddly but this is due to the truck design, not the bulbs. You must either dismantle the headlight surround and supporting structure to remove the headlight assembly or access the back of the headlight by partially removing the inner fender liner. I chose to remove the fender liner. In…

I highly recommend Sealight led head/fog lights just not these particular ones. I run (+family) Sealight leds in 5 vehicles 3 sets in my own SUV and have been overly impressed to say the least. These are the only "bladed" dbl sided DTP PCB lights I've purchased mostly out of concern of heat damaging the LEDs. 2mm of copper sandwich between 6 LEDs that get very hot just seemed like a recipe for failure. However you can tell in the photos that this is

Very bright, easy to install and loved the white light (other drivers did not) but one has already died in about a year. It seemed like the fan on it quit then overheated. I do not drive very much at night so they are only on in the morning commute so no where near the hours listed "more like 200hrs" Bought a replacement so we will see. If another dies I will search another brand. 2020 F-150

After installing these lights I can see what is out there in the night. The edges of the road and right of way are lit up great! Even on low beam I can see great. Only problem is they may be a bit bright for oncoming traffic. 2 out of 10 flash me their high beams, thinking mine are on. A simple flash of my high beams and they promptly turn their highs off.

I have a 2019 Subaru Legacy. every turn signal, brake light and daytime running light is already an LED on my vehicle. However the headlights (low beam AND high beam bulbs) are all incandescent halogens. likely put in as a cost-saving move. So I really bought these for cosmetic reasons, I thought the yellow-shaded halogens on my car looked awful mixed with all those white-light LEDs.I bought a set of H11's for my low-beams and a set of 9005's for my high-beams. I know the low-beams will…

I have a 2012 Mazda 3, so it will fit any second gen Mazda3. But this car came with halogens, and while they were fine I guess, they really struggled at night with no street lights. And the stock bulbs really couldn't see far at all.For only $35 these things are really easy to install, and are VERY bright. The biggest advantage is not how far they shine compared to a halogen, that has nothing to do with the bulb, instead the housing. But how bright something is from farther away. With halogens…

I installed them in my 2014 Ford Focus - a very easy task since you can remove the complete headlight unit after removing 2 screws (you'll need a T30 torx bit). Then I tested them using my lux meter. I parked the car 8 feet from my closed garage door and looked for the brightest spot. The halogen light was 700 Lux, the Sealight LED headlight was 1300 Lux, about 2 times brighter. Subjectively the LED lights were brighter, too, when I drove around at night, with a good light pattern. No rating on

This is my 1st set of LED bulbs. They have a lot of great reviews but there's a couple things to keep in mind. 1 - They do have a slight tint of BLUE. If I'm not mistaken, pure white is 5900k. Even if you have more lumens, you lose visible light when you go above or below the 5900k color. 2 - In a projector beam light, the glass will focus the light. In a reflector beam headlight assembly, the bulb needs to be lined up with the lines in the reflector glass. Even the instructions tell you to…

These are a quick diy solution to getting better lighting out of your hologen lense setup.Though I think the bulbs could be a little brighter. They get the job done at a third of the cost of many other bulbs.No need to do anything other than make sure the harnesses for your head lights are up to the task of delivering the required power needed. If they're not then spend a little more and invest in a new setup.Be warned you'll see better results if you clean the hologen lenses before…

I really like these lights because the light output is really great. Makes everything more visible and easier to see. Only thing is that one of them is already giving up and it’s been a year.