🔌 Enhance Electrical Testing with 5Colors Retractable Sheath Banana Plug Stackable Wire Solder DIY Connectors Review

Agree with other commenters I would add a few considerations on this product: 1. If you are using a smaller diameter wire a piece of heat shrink tubing over the insulator will increase the diameter and fill the power cord clamp and also add a strain relief/ Add bend.2. Yes, the wire could be fixed better here. If you solder it, pay attention to how it fits back into the connector, heat the other end to prevent the safety plastic tip from melting, use a good flux and ram the heat, it will stick.

Short version: I agree with other reviewers that these are well made banana plugs. I hope they will be useful to me in the end but they just don't work for what I bought them for. Longer version: I used these with a Jameco breadboard (WBU-208-R) to connect screw terminals to the top. Unfortunately, they have some fatal flaws that prevent this from happening: 1. The spring in the retractable shell is strong enough to push the connector back out of the screw terminal. The red tip at the end of…

These are by far the best candles I have seen in my limited experience. They are about twice as heavy compared to the others in the picture, weighing 6 grams when assembled. The metal fork alone weighs 4g, while the rest of the forks in the picture weigh 3.3g when assembled. Weight certainly means strength in this case. Cheap candles seem very thin. They're solid, the retractable shell and spring seem surprisingly strong too. I wanted better quality forks and did a lot of research before…

* The tips are fairly pliable, with plenty of spring leaves and a good relief cut. I've tested them with every banana jack I have on hand and they've made good contact with all of them with no issues.* The retractable shells move on their own metal spring and retract with ease when inserted into an unshielded or custom plug Inserting the connector has teeth to hold the insulation on the wire. This is where I got confused. I bought several 18AWG silicone covered wires with an overall diameter of