94109 20000 Differential Drain Washers Honda（20Mm） Review

Honda recommends replacing this seal when changing the oil in the rear axle differential. These gaskets do the job, but are a bit thinner than those previously installed, although that doesn't affect performance.

Installs seamlessly on 2011 Honda CRV EX-L Rear Differential. not an exact match to the standard part, but very close. Worked on both the drain and filler plugs.

Another important element of grooming that is often overlooked. Get them and replace them according to the manufacturer's recommendations as they are easy to install. Thank you for a simple but well-made article. Make sure you get the right size you are looking for. Honda has several sizes (14mm, 18mm, 20mm, etc.) depending on the washer you need.

About 1/2 the thickness of the original Honda washer I replaced the upper and lower diff filler nuts. The hole size was the same and when I put two washers together it looked almost like the original. I ended up reusing the old original washers because they looked thicker and were in great shape, the washer is clearly of excellent quality, I unscrewed it a bit. Now I have a packet of aluminum scrapers. I would go with a genuine OEM Honda replacement or other vehicle. I cannot recommend them as…

I bought these in bulk hoping to get an equivalent part as the Honda part number is listed. When I was ready to use two of these, I was disappointed to see that the width and thickness of these shims didn't even come close to matching the original Honda shims I was replacing. So I decided to extend the use of the original Honda disc since the differential fluid is not changed often anyway. Now I have time to look for the best replacement for the original disc. They could probably be used as…

20mm is just the size of the filler plug and this product doesn't match the OEM washer thickness or flange size anywhere - maybe 1/2 OD flag to ID and maybe 1/2 the thickness of the OEM one materials. . To make matters worse, the drain plug requires an 18mm washer, but you won't find it until you've drained the fluid! These lock washers are listed incorrectly for both the drain and fill plugs on the Revain for my 2014 Acura MDX SH-AWD differential. Don't waste your time here if you need a…