🌡️ Uxcell 10 Set K Type Thermocouple M/F Temperature Testing Probe Connector" Review

I haven't tested them against NIST standards or anything, but they seem to work fine. Within 5 degrees if that's all the precision I need.

Very fragile, a few screws fell out in transit but great for basic use. I wouldn't recommend using them for mission-critical work, but they're good for rapid prototyping.

Exactly as described, not the best quality but not the worst either. They work when you have a coil of thermocouple wire and want disconnect switches in your application.

Do not buy this for type K thermocouple temperature connections. I am an automation specialist with years of experience in thermal applications which will cause measurement inaccuracies. Proper plugs/sockets and cords conform to metal specifications from the connection point to the luminaire terminals. Any connections falsify the measured values and ultimately lead to poor results.

These things are such a train wreck I feel compelled to review. They use the smallest bolt and nut combination that has the nut loose. The quality of the plastic and the fit are poor and they don't stand up to the heat like other brands like Omega. For the k-type this is very important. Otherwise pretty much crap, you're better off using whatever connector you have instead. Don't be stingy, don't waste time looking for an M2 nut in the ground.