📱 Ace Tech Cellular iPhone XR LCD Screen Replacement 6.1 inch - Model A1984, A2105, A2106, A2108 - Display Digitizer Assembly with Touch Screen Review

First of all, the screen works. It's a much lower resolution than the original screen, but you'll have to cut corners somewhere. The problem is that the new screen had an extra screw in the touch window when I tried to install it. Most importantly, the pin of the screen flex cable gets very hot after the phone is turned on for about 1 minute. I suspect overheating leads to instability and screen failure. Until the cable overheats, the screen will work normally. But right now I have 2 useless…

I have repaired dozens of iPhones with different kits. The tools that come with it are just brittle plastic that will bend and break. If you are new to screen repair, chances are you will accidentally break tools before fixing your phone. The important part is the screen and the electronic components. They are in no way inferior to the originals from Apple. The screen resolution, touch response and brightness are as good as out of the box. I deduct 1 star for the tool. After repairing, you will

This iPhone XR replacement screen is of excellent quality with all kinds of protection and a set of quality repair tools including all the screwdrivers needed to repair later iPhones. The video included in the description was very helpful, although there are already many tutorial videos on YouTube. The only complaint I have is the suction cup, it's basically a joke unrelated to the broken screen, I had to buy a pliers style suction cup which did the job easily. So the cost of replacing the…

Was easy enough to change, with lots of tutorials on YouTube, took a few hours, make sure to apply the changeover glue before connecting the bands. The screen is not as good as regular screens, especially red, secondary blue, enough green, but not great. Although it's just as bright. There were a few dead pixels in the upper-left corner of the screen, but you might only notice this at boot or another completely black screen. I shouldn't have waited for a replacement without a phone or redo the…

I thought it was a mess to begin with. It was for my type of phone, but it was oriented differently and didn't suck up the screen (no suction at all) so I had to figure out how to lift the glass. I had to throw away my XR phone and invest a hundred dollars. I'd better pay the high price in store and at least get my money back over the phone. I really had no idea what I was doing and the problem it wasn't the same and the lack of suction left me in a stalemate that I made a very bad decision to…

Definitely worth the price. As you can see, my old screen was scattered and had multicolored vertical lines preventing me from seeing half of the screen. I didn't want to shell out half the cost of a new iPhone to replace the screen, so I decided to try it myself. It was pretty easy, although the instructions/videos were a bit confusing at times. I was able to do it, so I'm glad I spent the money to make it myself instead of paying $129 at the mall or $199 at the Apple Store to have it…

Very happy with the screen. It comes with all the necessary tools, a spare gasket and a new protective glass. It was a real PITA to remove the old screen with a suction cup, but after a few passes with a hot blow dryer and an extra hand, I was able to pry it out with the tools provided. The only thing I wasn't willing to do was move the camera tape from the old screen to the new one. The kit is complete and the screwdrivers were magnetic and pivoting which made the job a lot easier. Overall I…