Header banner
Revain logoHome Page
aclorol led pixel ws2811 string lights - waterproof ip68 full color rgb, 12mm diffused, individually addressable, black wire - perfect for christmas holiday party decorations - 500pcs/10sets logo

Aclorol LED Pixel WS2811 String Lights - Waterproof IP68 Full Color RGB, 12mm Diffused, Individually Addressable, Black Wire - Perfect for Christmas Holiday Party Decorations - 500pcs/10sets Review

7

·

Average

Revainrating 3 out of 5  
Rating 
3.1
🎄 Seasonal Lighting, 🍁 Seasonal Decor

View on AmazonView on ЯM

Media

(4)
img 1 attached to Aclorol LED Pixel WS2811 String Lights - Waterproof IP68 Full Color RGB, 12mm Diffused, Individually Addressable, Black Wire - Perfect for Christmas Holiday Party Decorations - 500pcs/10sets
img 2 attached to Aclorol LED Pixel WS2811 String Lights - Waterproof IP68 Full Color RGB, 12mm Diffused, Individually Addressable, Black Wire - Perfect for Christmas Holiday Party Decorations - 500pcs/10sets
img 3 attached to Aclorol LED Pixel WS2811 String Lights - Waterproof IP68 Full Color RGB, 12mm Diffused, Individually Addressable, Black Wire - Perfect for Christmas Holiday Party Decorations - 500pcs/10sets
img 4 attached to Aclorol LED Pixel WS2811 String Lights - Waterproof IP68 Full Color RGB, 12mm Diffused, Individually Addressable, Black Wire - Perfect for Christmas Holiday Party Decorations - 500pcs/10sets

Description of Aclorol LED Pixel WS2811 String Lights - Waterproof IP68 Full Color RGB, 12mm Diffused, Individually Addressable, Black Wire - Perfect for Christmas Holiday Party Decorations - 500pcs/10sets

Good waterproof performance, the waterproof level is IP68, ensure that the product can be used perfectly outdoors ,even underwater. IP67 waterproof grade. Individually Addressable:Each LED can have its own color and brightness. You can control each LED individually through the controller so that it can light multiple color or single color at the same time. The WS2811 LED pixel lights can be controlled by SP103E, SP105E, SP106E, SP107E, SP108E, SP110E, SP201E, SP501E. It is also compatible with Arduino, Raspberry Pi, FadeCandy, T1000S or K-1000C ect programmable controllers. The pixels are connected by a 3-conductor cable on both ends and separate GND/12V+ wires.Each pixel can be cut off without damaging the rest pixels.So you can shorten or extend the distance between two pixels if you want. Suitable for advertising box,billboard lighting, logo sign and outdoor advertising signs,KTV, bars, commercial street atmosphere lighting and so on.

Reviews

Global ratings 7
  • 5
    2
  • 4
    1
  • 3
    1
  • 2
    2
  • 1
    1

Type of review

Revainrating 5 out of 5

Smaller wire size than expected but they work.

I was surprised it was only 20 AWG wire but so far they are working fine. I just installed them so time will tell on durability. The colors are even and look great.

Pros
  • Weight
Cons
  • Empty

Revainrating 2 out of 5

Plugs are not standard

Good luck finding plugs for them. The thread is on the plug, not on the socket. I'll cut them off to make them work now as I don't have time to find connectors that work. I bought these because they had power connector tees that are hard to find. What a disappointment. That's why standards are important!

Pros
  • Stylish and modern design
Cons
  • Negative impression

Revainrating 3 out of 5

Great headlights only 1 problem.

Pros: Hell Hell Hell! The colors match very well. Good wire and they are waterproof. Paired with Nodemcu and Wled and they are great. If I had time I would just get a replacement but they had to rise so I cut off the first 4 and stretched them to fit. Otherwise it would be 100% 5 stars.

Pros
  • Best
Cons
  • Speed

Revainrating 2 out of 5

***NOTE*** Power injector tees

Please note. They do not match the COLOR CODE for DC POWER. The power injector tees are NOT color coded as expected. RED is NEGATIVE and BLACK is POSITIVE. Pins on 3 pin connector: Left to Right: White Tracer: NEGATIVE Center: SIGNAL Right: POSITIVE I was quite upset to find this. Luckily there was no damage. There are NO instructions that indicate the color coding of the wires.

Pros
  • One year trial period
Cons
  • Something else

Revainrating 1 out of 5

Attention! Splitter connected incorrectly!

The splitters included in the kit are not properly connected. There is a -/+ and a data splitter that you can use to power larger installations. Black and red wires come out of this splitter to supply power - the problem is that the red wire is internally connected to the data wire (the middle wire) so trying to 1.) supply power won't work and 2.) can damage the LEDs and the block feeding. If you want to connect more than 2 strings, THIS PRODUCT WILL NOT WORK.

Pros
  • Durable finish
Cons
  • Very expensive

Revainrating 5 out of 5

Excellent with some features!

>>>>Read before using with Arduino<<<< I am using Vixen with Arduino as controller. I watch the YouTube channel CLICK THAT MOMENT. It overlooks two important variables. When sending the number 50 pixels to the Arduino, it shows >>50<<. That is not true. It must be a three-digit number, e.g. >>050<<.2. In Vixen these pixels (12v WS2811 50px) need to change color order from RGB to GRB. I struggled for a minute and almost collapsed and bought an…

Pros
  • Cool product
Cons
  • Minor issues

Revainrating 4 out of 5

Works well with the Raspberry Pi Falcon Player

These strings work great with the Raspberry Pi Zero Falcon Player. I control the strings (3x100) from a raspberry pi zero w via a level switch to boost the pi output from 3.3v to 5v. The color order should be set to GRB as another reviewer noted. I'm running the whole thing (3x100 strings and a Raspberry Pi Zero) from a single power supply plugged into one end of the string, it looks like I won't need to add power through the Ts provided, hopefully it still holds up if I add the extra length of

Pros
  • Hands-Free Operation
Cons
  • -