📱 Digital PK 110 American Weigh Scale Review

Suitable for weight measurement, but LCD color/backlight is not suitable for camcorders. I wish there was an option to turn off the backlight. Even if the manual says nothing about it.

I used a dial to tune compound bows it was very accurate did exactly what I needed for about 2 years. Took it out of the tool box yesterday, changed batteries, cleaned contacts and now all I have is an orange screen. Now I'll try something else.

If you put a light weight (2 pounds) on the hook, take it off. Then again etc. The weight is never shown twice. In fact, if you weigh the same weight again, the weight usually increases by 0.1 or 0.2 pounds. The tare is constantly changing, which requires a tare reset. why continue?

I bought it and loved it the first year. Then it started to bother; stopped holding the last unit of measure used and randomly went into calibration mode. I've made peace with that, but then it occurred to me that with all this erratic behavior, maybe I should double check the accuracy of the scale - it's off by 1.5 ounces; I'm here on Revane this morning looking for a new gauge.

I bought this draw gauge for several different compound bows. Before use, you need to open the battery compartment with a small Phillips screwdriver and remove the small paper insulator from the batteries. Then follow the prompts to change the setting to Peak to display the heaviest weight during the harvest cycle. (maximum 5 minutes). To measure the draw of a compound bow, I hang a scale on a nail in the wall (about chest height), put the hook of the scale into the loop of the string on the…

It came as expected. I was a little apprehensive about ordering this product as the seller has not responded to any recent questions about it. But it turned out to be the best product for what I was looking for, which was the suspension and peak tension scales. I am very satisfied with this product. The only downside was that the batteries in the machine were rusty and I had to take them out and give the machine a thorough cleaning with electronics cleaner and a small brush. Otherwise, the…