🔌 Highly Flexible AWG Welding Cable Now Available for Purchase Review

Rugged outer jacket between connector and pair separation channel element – A tough but strong cable. The internal pairs are indeed a good 23 AWG, which is great for carrying more POE DC power and less signal attenuation. To be clear, this is an outer aluminum foil shield with a ground wire. Individual pairs are not shielded. There's no water-resistant gel, but it's easier to work with for those familiar with OSP cables. When properly wired and connected, CAT6 cable will pass 550MHz signals for

This cable is what you need to install if you're going to bury it and run it outdoors.* The outer shield The cable's durability is excellent for heavy use and definitely protects the inner copper wires from the elements.* After cutting the outer shield, you'll see a foil shield that helps prevent crosstalk and EMI* Good, heavy, solid 23AWG copper conductors. As far as I could see they are not covered with aluminum. * I ran this cable outside at the radio tower and then in a pipe buried a foot…

This is an excellent Cat 6a cable. It is very thick due to the extra shielding. Although it is not intended for home use. This is a special cable for specific applications. It will not fit standard shielded plastic or even metal terminals. It has a metal ground wire with a shield and a thread for trimming the plastic sheath. The wire gauge is the advertised 23 AWG, but the insulation is thicker than expected, so again it doesn't match traditional connectors. It does, however, mate with Revain's