🔌 Axxess AX-TOY28SWC Toyota Steering Wheel Controller Add-On Harness with RCA and 28-Pin Connector - Enhanced for SEO Review

Connecting the factory connectors to the Metra Axxess ASWC-1 worked well. This minimized installation time and eliminated the need to damage factory wiring connections. It's worth the purchase price.

I used this wiring harness to fit a Pioneer AVH-210-EX radio to my 2013 Toyota Highlander. This made it easier to connect the Steering Wheel Control Module (SWC) and also allowed the car's AUX input to be connected to the Pioneer radio.

I was very happy to find this pendant. When I ordered this product I wasn't 100% sure it would work for my application but luckily it worked for me! I just didn't want to cut into the factory wiring harness unless it was necessary, just in case I ever need to remove an aftermarket stereo.

Easy to install. in combination with Axxess ASWC-1. This made it easier to get steering wheel buttons when installing an aftermarket radio in a 2012 Corolla. The instructions weren't very good, but searching the internet for a connection diagram solved this problem. Technical support not used, so the rating is neutral.

Replace the wiring harness supplied with the ASWC-1 with this and connect to the original wiring harness. No soldering or splicing of wires. Once connected, you may need to press the reset button on the ASWC-1 device and you're done.

Corolla 2012 This small suspension allowed all the steering wheel controls to work with the Pioneer AVH2550NEX. I first tried hooking up an Axxess box without that extra suspension and I only had half the steering wheel. control works. I looked there for different PIN codes for the original car wiring harness. But once it's connected, it's DAMN SIMPLE. And again I pushed the reset button on the box, this time EVERY button on my steering wheel worked just like it did originally. Excellent…

This is the specific wiring I needed for my 2012 Toyota Camry Hybrid LE. You still need to purchase the Axxess ASWC-1, but do not use the wiring that comes with the ASWC-1. 2 wires to connect, then plug and play. The ASWC-1 has adapted to my handlebar controls. You must purchase a 3.5mm jack on the AV to support auxiliary output.

Replace the wiring harness that came with the ASWC-1 with this and connect to the original wiring harness. No soldering or splicing of wires. Once connected, you may need to press the reset button on the ASWC-1 device and you're done.

2012 Corolla This little hanger kept all the steering wheel controls working with the Pioneer AVH2550NEX. I tried hooking up the Axxess box first without that extra suspension and I only had half the steering wheel. control works. I looked there for different PIN codes for the original car wiring harness. But once it's connected, it's DAMN SIMPLE. And again I pushed the reset button on the box, this time EVERY button on my steering wheel worked just like it did originally. Excellent purchase