🔧 BAL 23222 Set of 2 "C" Jacks with Handle - 22": Sturdy and Reliable Lift for Easy Maintenance Review

Be sure to measure beforehand! It was my fault but my trailer room was 52 inches and the OAL of the two stabilizer bars was 53.5 inches. I needed height and quality, so I avoided the scissor type. I was able to cut 3/4" off each stabilizer bar, pre-drill two new holes, and use an extra bolt to get a solid fit. The idler wheel touches the bolt heads when fully retracted. So far (oh my god, 24 hours of use ) they work great. My small 14" canned ham is very strong. This suggests the seller sent…

I bought these because the factory stabilizers on my 2019 Forest River Wolf Pup 16BHS failed after only 6 hikes. The factory scissor jacks were ridiculously flimsy and every movement in the trailer was transmitted everywhere. Then I installed them. Wow. It's day and night. Serious. I should have done this a long time ago. Each is installed with the 3 included self tapping screws which I simply installed with a socket on a 3/8 adapter that plugs into my Ryobi 18v drill. It took me longer to…

Sturdy, well made, easy to install after I bought the hardware for it. The box was damaged in transit and I couldn't tell if the mounting screws were originally included. There are several models so measure carefully to ensure you have the correct width and rise height. They hang down a few inches (3 1/2?), so keep that in mind if you already have a gap problem. On my trailer, it takes about 15-20 turns to lower each jack. The only difficulty with installation is that movement of the joint at…

I am satisfied with these jacks. You'll hardly notice them when they're fully retracted. They appear to be built well enough to do what they were designed to do. I'm a little disappointed that I had to mount the front ones parallel to each other as the tabs get in the way. I can fit them right in the back of the trailer so hopefully this will avoid unnecessary stress on the front when I pull in. A few things I didn't like about Jacks. :1) The packaging didn't survive the nightmares during…

BAL "C” Sockets I don't usually write long reviews but BAL C sockets deserve it. My 25ft 5500# RV came with medium sized "scissor" jacks. They did little to stabilize lateral movement. Lateral movements were completely prevented with high-quality BAL scissor jacks between the twin wheels. Scissor jacks mounted on a standard frame (front and rear) were mounted on a side frame about 14 inches from the sides of the trailer. Bumper mounted BAL C-bushings were installed to the rear bumper using 4"…