Header banner
Revain logoHome Page
🔋 tubular battery terminals: enhanced terminal connectors logo

🔋 Tubular Battery Terminals: Enhanced Terminal Connectors Review

8

·

Excellent

Revainrating 5 out of 5  
Rating 
5.0
🔌 Wiring & Connecting, 💡 Industrial Electrical

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔋 Tubular Battery Terminals: Enhanced Terminal Connectors
img 2 attached to 🔋 Tubular Battery Terminals: Enhanced Terminal Connectors
img 3 attached to 🔋 Tubular Battery Terminals: Enhanced Terminal Connectors
img 4 attached to 🔋 Tubular Battery Terminals: Enhanced Terminal Connectors

Description of 🔋 Tubular Battery Terminals: Enhanced Terminal Connectors

【What You Get:】 10 Pcs per pack of 1/0 Guage (AWG) 3/8" ring terminals, copper lugs closed end termination ring terminals with 10 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red). 【Quality Material:】 The TKDMR bare copper battery cable ends are made from 100% annealed copper with special treatment surface for corrosion protection, providing a high degree of conductivity for maximum current flow. Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257°F), thick and durable than 2:1 shrink tube. 【Reliable and Easy to Use:】These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation; high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency. 【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , greating for distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY Electrical Wirings and Other Outdoor Applications. 【How to Choose and Use it?:】 Recommend to check product dimensions to ensure a proper fit.Freedom to choose from a variety of wire sizes, stud sizes & pack quantities, that fit your requirements and applications; Can be crimped or soldered; Audio wire may not be a direct fit.Use with a compatible copper cable.

Reviews

Global ratings 8
  • 5
    8
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Urgently needed for clamps

If you look at the picture the two on the left are not tight enough to hold 0 gauge wire. They were always easygoing. Copper ferrules after crimping and shrinking provide the best performance. Highly recommended.

Pros
  • Quality construction
Cons
  • Minor issues

Revainrating 5 out of 5

Excellent cable holder.

Excellent cable holder. A significant improvement over crimp connections, especially for larger diameter wires. Well, with a little more time spent on each connection, the satisfaction of upgrading the electrical system is well worth it.

Pros
  • Good thing
Cons
  • Update available

Revainrating 5 out of 5

Holds up well with 6 AWG wire for a small solar array

I bought these spade lugs to install a small "solar wall" in my closet to connect my deep cycle batteries, charge controller and inverter. I've used a cheap hydraulic crimping tool bought here from Revain to crimp them and so far I've had no problems.

Pros
  • One year trial period
Cons
  • Slightly wrinkled

Revainrating 5 out of 5

Battery Cable Guide

I found these battery clips to be exactly what I needed for my solar panel project and they fit the bill perfectly. After pre-tinning the 4 AWG wires I used a hydraulic crimping tool and they formed nicely. The adhesive in the shrink sleeve flowed perfectly and sealed the crimp. I will buy more.

Pros
  • Absolutely Amazing!
Cons
  • Negative Impression

Revainrating 5 out of 5

Great for adding an automatic ground wire

Camaros are notorious for poor grounding so I used these 1/0 gauge wire clamps to create a ground from the ground point to the engine block. The Camaro forums say this helps with warm up/hot start issues. So far I haven't had any issues with my 2018 Camaro SS 1LE. The connector was easy to solder to the wire. Appears to be of high quality. No problem.

Pros
  • Decent performance
Cons
  • I'm writing back

Revainrating 5 out of 5

Perfect size for my Honda battery cables

These are perfect for Honda battery cables, no more trying to twist all the strands into a hole and crush them! I didn't have a crimping tool so I had to make a linear indentation at the top and bottom (I used the end of the screw head and tapped it lightly with a hammer at the top and bottom until a small indentation formed) and then compressed it with channel locks but it did works great.

Pros
  • Industrial & Scientific
Cons
  • Other

Revainrating 5 out of 5

Pure copper is everything

Bought these to solder to new #2 AWG wire for my golf cart. I installed a new 500 amp controller and had to increase the power wiring. They were PERFETC, suitable not only for my wire but also for my battery tips. The only exception was a 3/8" bore kit that I bought from the same seller. They were needed for a new 1000 amp solenoid. And yes, with the new Plum Quick motor in the rear, I'm going 32 miles per Hour without any sign of overheating, thanks in part to these terminals!

Pros
  • Wiring and connector
Cons
  • Very expensive

Revainrating 5 out of 5

Ideal for solar panels

These are copper terminals for high electrical conductivity. They are thick, strong, and crimp very well, providing a secure connection. They are well marked for easy size identification. The shrink tubing works great. They are perfectly sized and have an adhesive backing to create a secure yet flexible protective coating at the cable/lug connection. These are well made and high quality cable lugs that offer a secure/reliable connection at a great price making them amazing value for money. I…

Pros
  • Terminals
Cons
  • Doubtful