🔧 BCP 100pcs Silicone Mounting Flat Bracket Clips for 14mm Max Width LED Strip - Easy LED Strip Installation Review

They were perfect for mounting my LEDs around the fire pit. They are flexible but hold up well and the screws have a washer head so they hold up well.

These clips work well with my Philips Hue light strips. You sent enough that I didn't skimp on editing. I found that I placed them 10 inches apart and they work well on the ends.

The brackets are made of soft silicone plastic. As a result, the brackets can easily tear off when tightening the screws. The screws are cheap sheet metal. In at least 25% of the cases, the screw heads broke during tightening. Do not buy !

They are useless. It could not be used to install LED strips. Weak, and the screws are so small they don't sink into anything. I gave up after trying to use them. I can't go back a few weeks outside of the return time.

There is still silicone in the holes of all the pieces so you have to push each screw out and throw away the silicone or it won't even get into the wood. These screws are so tiny, not even Phillips #1, and were so difficult to get into the soft and old wood. I would never use them again. I had to buy my own screws to make them work.

These brackets are EXACTLY as described! I needed clips when my light strip goes around corners because the tape doesn't tend to stick. The mounts are perfect and hold the band exactly as they were designed. It's silicone which means they aren't rigid, making installation a little tricky but doable. Bad reviews are due to people not reading the description carefully enough, there is absolutely nothing wrong with this product.

These brackets fit snugly onto the Philips Hue light strips and hold them in place. They're also translucent, so if you mount them on an LED in a strip, they won't block the light. I've used them to attach a series of Hue light strips to the underside of kitchen cabinets. The table lighting looks fantastic and after a few months the brackets are doing their job of holding the strips in place where the adhesive is starting to come off.