Header banner
Revain logoHome Page
πŸ”Œ btf-lighting 10 sets 3-pin 10mm width right angle l shape solderless corner connector for ws2811, ws2812b, and sk6812 led strip. no soldering required. supports led strip with 144 leds-per-meter and altove led strip. logo

πŸ”Œ BTF-LIGHTING 10 sets 3-PIN 10mm Width Right Angle L Shape Solderless Corner Connector for WS2811, WS2812B, and SK6812 LED Strip. No Soldering Required. Supports LED Strip with 144 LEDs-per-meter and ALTOVE LED Strip. Review

4

Β·

Terrible

Revainrating 2 out of 5Β Β 
RatingΒ 
1.8
πŸ’‘ Ceiling Lights, πŸŒ€ Lighting & Ceiling Fans

View on AmazonView on Π―M

Media

(4)
img 1 attached to πŸ”Œ BTF-LIGHTING 10 sets 3-PIN 10mm Width Right Angle L Shape Solderless Corner Connector for WS2811, WS2812B, and SK6812 LED Strip. No Soldering Required. Supports LED Strip with 144 LEDs-per-meter and ALTOVE LED Strip.
img 2 attached to πŸ”Œ BTF-LIGHTING 10 sets 3-PIN 10mm Width Right Angle L Shape Solderless Corner Connector for WS2811, WS2812B, and SK6812 LED Strip. No Soldering Required. Supports LED Strip with 144 LEDs-per-meter and ALTOVE LED Strip.
img 3 attached to πŸ”Œ BTF-LIGHTING 10 sets 3-PIN 10mm Width Right Angle L Shape Solderless Corner Connector for WS2811, WS2812B, and SK6812 LED Strip. No Soldering Required. Supports LED Strip with 144 LEDs-per-meter and ALTOVE LED Strip.
img 4 attached to πŸ”Œ BTF-LIGHTING 10 sets 3-PIN 10mm Width Right Angle L Shape Solderless Corner Connector for WS2811, WS2812B, and SK6812 LED Strip. No Soldering Required. Supports LED Strip with 144 LEDs-per-meter and ALTOVE LED Strip.

Description of πŸ”Œ BTF-LIGHTING 10 sets 3-PIN 10mm Width Right Angle L Shape Solderless Corner Connector for WS2811, WS2812B, and SK6812 LED Strip. No Soldering Required. Supports LED Strip with 144 LEDs-per-meter and ALTOVE LED Strip.

You need to simply slot strip light into connector and close (no need soldering).(Can not support 144LED/m led strip)Can't Support ALTOVE LED Strip. L Shape 3 Pins Connector 10mm is very safe to use.(Can not support 144LED/m led strip). It is for LED strip 10mm wide. The product is High Quality & High Cost Performance & High Security. for LED tape DIY project is Compatible with both waterproof and non-waterproof light strips. a pack of 5 L Shape 3 Pins Connectors of 10mm along with 10 Clips which can be used to connect it to the LED Strips.

Reviews

Global ratings 4
  • 5
    0
  • 4
    0
  • 3
    1
  • 2
    1
  • 1
    2

Type of review

Revainrating 1 out of 5

Not for Govee: Connections

I wanted to install some Govee light strips with IRGB 3 pin WiFi in the corners. I tried and tried and sometimes even by cutting off part of the strip I could get a solid connection and a total failure ended up soldering them and using some wires and solder for the corners. All in all, I knew that unless you came from an LED strip manufacturer you probably wouldn't get anything that worked, but it wasn't very good. I checked the power on all the cones and only 1 worked. Maybe I just caught a…

Pros
  • Lighting and ceiling fans
Cons
  • Long delivery time

Revainrating 3 out of 5

Absolute rubbish. fits ceiling light

I didn't have high expectations for this ridiculous product but I was still disappointed. Those pathetic plastic things are there to save you a few minutes of soldering, not to save you. It's a huge hassle to attach them correctly, using little latches that tend to break, and just attaching tin connectors and then realizing that none of that works anyway. The conductors don't connect, the circuit doesn't close, and yet this is an old soldering iron. Except waste of time and money. Absolutely…

Pros
  • connector
Cons
  • 0

Revainrating 1 out of 5

Great idea but poorly done - DO NOT BUY YOUR LED STRIPS!

Tried to use it from https://www.amazon.com/gp/product/B00ZHB9M6A/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 and that plug design was pure bullshit. You can see in the photo that the 5V LED strip barely touches its female connector clip that connects the 90 degree connector (not fully visible on the left) and the LED strip (shown on the right). YOU MUST HOLD THE GND AND 5V CONNECTIONS TO MAKE PROPER CONTACT. Even on the 90 degree connector that comes with clips, you can see that the metal

Pros
  • Ceiling lights
Cons
  • Useless features

Revainrating 2 out of 5

Closed my lines; even if there was no voltage drop, it was bad

I bought this product hoping to avoid hand soldering in my project. I plugged everything into these outlets, plugged in the power and blew the fuse because those outlets shorted out my lines. As a result, we connected +5V to ground. As far as I could tell, the problem was the "prongs" at the top, which cut into the connector when closed. There were two prongs, the first bit on the right between data and ground and the other between +5V and ground, but if they went too low (which they did in…

Pros
  • Tools and Housewares
Cons
  • Almost everything is fine