BUCKLOS MTB 170Mm Square Taper Crankset, 104 BCD Mountain Bike Narrow Wide Tooth Chainring 32/34/36/38/40/42T, Single Speed Round/Oval Chainring And Crank, Fit Shimano, SRAM, FSA Review

These are mostly great. I made the mistake of not quite tightening the left one and when it came loose on a long ride, the action of me pushing on the crank actually gouged some metal in the crank so now it won't stay on reliably even when fully tightened because the hole is no longer fully square. The right one though is fine so i have to write this off mostly to me not tightening the left one sufficiently to begin with. That said beware or else like me you'll need a new one or both.

Nice crankset with chainring. I have not seen anyone state the bottom bracket spindle length needed for this yet. The bike I installed this on had a bottom bracket with a 112mm spindle. This was too long( see chainline in picture #1). I had to put the chainring on the inside of the crank to get the chainline correct (see pic #2). I would guess the correct spindle length would be around 107 mm or so. Using with a 10speed chain. Everything is running smooth, will update if crud hits the fan.

The crank that came on this bike was the kind with an integrated sprocket (30t) and since this was a hardtail MTB I needed to change the gearing for my gravel bike conversion. So I bought this crank set as a replacement. After having to cut my old crankarm off (it was stuck and my local shop broke 2 puller tools trying to get it off), I finally was able to install this one as well as the 40t chainring. As of 6/29/21 I've put 43mi on the crankset with no issues! weight is also a really nice…

Bought these to replace the stock 36T crankset on my Mongoose Dolomite. Fits great with plenty of clearance between the chainstays and the crankarm. Seems sturdy.

Got these to replace OEM 52T crankset that came with my E-Bike, the left crank would always get worn out and I really wanted to run Sram Dub Fat 5’s but I’m missing a few mm’s so got these until my next bike arrives and I can modify my current one to fit the sram set. So far they seem solid and shaved some noticeable weight off, and I like the variety of swappable chainrings bigger or smaller for different applications. The chainring that came with the set feels very durable and have long…

This is a good quality product but, it didn't work for me. The chain ring was 2.5cm out from the center of my cassette so be sure you measure. This created an extreme chain angle which in turn creates shifting issues. The seller promptly gave me a refund. If you can make it work I think its a quality product (although a bit on the heavy side) for the $$$$.

It soppose to come with the bolts I guess but I doesn't The product may require professional installation for optimal performance.

Bought this as an experiment with oval single rings up front. Very well made though a skosh heavier than I was looking for. The oval 32t has done wonders for climbing on the gravel around here. Running 32/42-11 9 speed gives a straight chain line on the 13 and 11 so there’s OK speed on flats.

seems durable and lighter than my stock crank. Swapped to a 1x11 drive and ditched my old 2x8 with this crank. Love the torque from the 32t oval ring also.