🚴 BWSHLF Tubeless Presta Valve Stem Kit - 40mm / 44mm, Super Lightweight Alloy, Includes Value Core Remover Tool and Valve Stem Caps - Multiple Color and Size Choices (Pair) Review

I ordered a red 44mm valve stem as shown in the photo. However, I misunderstood that the length depends on the rubber part. After some communication with the seller, he quickly solved the problem to my satisfaction. Excellent after-sales customer service!

Good quality so far. I love that you get 2 different caps, both with built in tool for removing the presta valve. I haven't traveled with them yet. But the bead popping seemed to be much faster when just using the Ryobi Aur pump. This is because the 4 extra holes allow more air to pass through faster. Pleased with the golden color. Hopefully in the future they will make orange and green colors to match my bike colors.

If you have tubeless wheels it is good to have excellent valves for them, sometimes the valve core is not removable and this makes it difficult to fill the wheel with sealant. These valves look great, amazing quality, the core is removable, you have more holes on the valve for better airflow, and you also have 2 different valve caps which are also a coring tool. Simply put, good quality, great product, great valves at an affordable price.

great price and durability. they seal well. The only downside is the width of the valve section, which is inside the tire. You may need to fiddle with the tire the first time you mount it as it is a wide valve base and you need to bead it properly. . Although I've worked with bikes (and cars) for decades this was my first tubeless wheel that installed with no problems and they helped and seal tight - the seals do the trick - and they look good and come with 2 sets. hats. Theirs are also cheaper

If you have a tubeless valve fitted you can fit that. The rubber is large enough to fit any tubeless rim without having to switch to a different shape. The rubber is adjusted to sink deep into the presta hole for a good seal. The coloring is perfect. As with the mucus flaps, make sure the removable cap is positioned over the core as straight as possible so it doesn't come loose. I disassembled mine when I was in a hurry, but I've also done it on diverter valves. This is user error, not product…

Many tubeless Presta valve stems sold by Revain will clog almost immediately if they let air through at all. I was very upset about that. They're not usually that expensive, but when inflating tires takes minutes and you have to look to Revain for another valve, it quickly becomes obsolete. These valves work great. They let in a lot of air. Side ports are a good idea. They also look great on the bike. They attract people's attention. You also have two dust covers to choose from. Both look…

These valve stems did exactly what I needed. I mounted them on an e-bike rim that was drilled for Schroeder. I went tubeless and the valve stem I was using blew the valve hole. This valve has a metal flange under the gasket that prevents passage. It is perfectly sealed and the caps have a built in valve core removal tool. The holes in the bottom of the valve stem are more than enough to fill up the sealant. The only issue I had with installation was when I installed the locking ring, I forgot…

These valves look great and are extremely easy to install. They also seal very well and haven't missed a single psi since they were installed on my road bike at normal tire pressures of 75psi. Valve core removal caps are nice, both types - I prefer tapered over cylindrical - and work exactly as they should, I've removed valve cores a few times with no problems. With the box, which is very well received, I removed the foam from the inside and use it to store various things. On the other hand the