Header banner
Revain logoHome Page
car compressor avs ks900 90 l/min 10 atm silver logo

Car compressor AVS KS900 90 l/min 10 atm silver Review

20

·

Average

Revainrating 4 out of 5  
Rating 
4.0
Automotive, 🛠️ Replacement Parts, 🌡️ Engine Cooling & Climate Control, 🛠️ Replacement Parts

View on AmazonView on ЯM

Media

(39)
img 1 attached to Car compressor AVS KS900 90 l/min 10 atm silver
img 2 attached to Car compressor AVS KS900 90 l/min 10 atm silver
img 3 attached to Car compressor AVS KS900 90 l/min 10 atm silver
img 4 attached to Car compressor AVS KS900 90 l/min 10 atm silver

Photos by authors

(36)
img 40 attached to Car compressor AVS KS900 90 l/min 10 atm silver
img 41 attached to Car compressor AVS KS900 90 l/min 10 atm silver
img 42 attached to Car compressor AVS KS900 90 l/min 10 atm silver
img 43 attached to Car compressor AVS KS900 90 l/min 10 atm silver

Description of Car compressor AVS KS900 90 l/min 10 atm silver

Automobile compressor AVS "KS900" is designed for air inflation of tires of cars and commercial vehicles. Compressor operating voltage - 12V. High performance makes wider applications possible. The car compressor can be used to inflate balls, mattresses, paint work. Thanks to a convenient bag, the compressor will easily fit in the trunk of your car, and storage and transportation will become even more convenient. The compressor will not take up much space in the trunk of your car and will always be at hand, and its additional components will not be lost. The compressor housing is made of metal, which provides protection from light mechanical damage and gives the compressor additional wear resistance. Characteristics:► Maximum consumption current: 30 A.► Voltage: 12 V.► Power: 350 W.► Maximum pressure: 10 Atm.► Productivity: 90 l/min.► Operating temperature: from -35°С to +80° C.► Cable length: 3 m.► Weight: 4.5 kg.

Reviews

Global ratings 20
  • 5
    11
  • 4
    3
  • 3
    2
  • 2
    2
  • 1
    2

Type of review

Revainrating 5 out of 5

Matches the description completely, very satisfied.

The most important filter and guarantee of stable operation of the device! It will allow the compressor not to clog with foliage, dust, small particles and dirt, so the performance will be at its best, because if it gets inside the device, this can lead to increased wear of the internal parts of the compressor, such as the valve, which can ultimately lead to a decrease in performance. - alligator clips - on the battery terminals, with wiring 3 meters long, and a 40A fuse: crocodiles, fuse 40A -

Pros
  • Dry device specifications: Maximum current consumption: 30 A Voltage: 12V Power: 350W Maximum pressure: 10 Atm. Productivity: 90 l/min Operating temperature: from -35°С to +80°С Cable length: 3m Weight: 4.5 kg And being sure of the necessary reserves in terms of performance, and hence the speed of the device, and thanks to the wide range of equipment, at the same time in the convenience of working with this device, The compressor itself is heavy, which means it is made of high-quality metal alloys, the assembly and painting look to be of high quality! The platform on which the compressor itself is mounted and stands is a vibration platform! This means that it will work more quietly, without vibration, and therefore without excessive noise. Productivity: 90 l/min. This high performance makes this compressor model suitable for a wider range of applications: – the car compressor is designed for air inflation of tires for cars and even commercial vehicles, Now we come to the inspection of the rest of the configuration, in addition to the compressor: - Storage bag with two compartments: for the compressor itself and for the coiled hose, convenient bag for storage and transportation 2 sections: upper for compressor and lower for line - instructions for use and warranty card, instructions and warranty – also, a car compressor can be used to pump up balls, mattresses, and carry out painting work. The necessary nozzles (except for the spray gun) are included in the kit. large set of nozzles — air filter (2 pieces). filter

Revainrating 5 out of 5

Reliable purchase, guaranteed to be a good purchase.

There is already a compressor of this manufacturer in the arsenal and the impressions about it are extremely positive. For the money, this is perhaps the best offer price / quality. I took the most powerful, because. it took "a lot of air" to inflate the mattress into the car, and the speed with which it inflates the R16 65/205 wheel is amazing! In general, I recommend!

Pros
  • Fast, powerful, reliable! A bunch of adapters for all kinds of inflatable devices. Pressure gauge scale in atmospheres and deflator valve.
Cons
  • Unfortunately, the compressor does not know how to jump out of the trunk itself, determine the front of work and brew coffee!

Revainrating 2 out of 5

Poor quality, not suitable for use.

Launched once, from 1.5 to 2 atm. downloaded 2 minutes. Took it apart at work and figured out what was going on. The flap valve in the lid is made of raw iron, which does not have a hint of strength. The piston bearing frankly dangles on the shaft - the fit is loose. The cylinder and piston are lubricated with some kind of muck, it looks like aerosol silicone with debris inclusions. It will not be enough for a long time, there is hope that the CPG will come from the golden eagle. In general…

Pros
  • Rich equipment
Cons
  • Disgusting quality of the cylinder-piston group

Revainrating 3 out of 5

Not a bad product, nothing extraordinary.

I arrived with a dirty bag, the order was for a gift, so there was a residue! Uncomfortable hose and short wires. Used the pump twice and the bag broke. Yes, it pumps up quickly, but there are also disadvantages!

Pros
  • Pumps up fast
Cons
  • Dirty bag! Uncomfortable hose and short wires.

Revainrating 2 out of 5

The purchase did not bring joy, the product is bad.

connecting to the battery terminals, here's the story, because of the short wire, the compressor remains no further than the front wheel, so when we swing the front wheel, the air hose lies on the pavement, if it rains, you need to keep it so that it doesn’t get very dirty (I want to clean it clean), and while you are holding it, you need to unscrew the hose from the until you unscrew it, it blows off. But swapping the rear is generally a song, you go to wind it up on the back, wound it up…

Pros
  • - pumps fast - excellent price (3300) compared to similar compressors
Cons
  • - winding on the )) not a convenient connection (but not critical) - after screwing the hose to the , it blows the wheel through the pump housing - gets very hot - short electric wire - long air hose - large enough pump body

Revainrating 1 out of 5

Lame product and terrible quality.

It heats up very strongly, additionally clogged air tanks with kvpt paste for better heat dissipation. A flat 35 wheel with a screw did not pump at all for half an hour, and the screw holds air decently! Disgrace! Pros: heaviness, characteristics on paper, a lot of nozzles. The body is magnetic - the nozzles are magnetic to it. Has some cons: 35th wheel didn’t pump up at all in 30 minutes, I’ll spell it out - Nikolai, Ilya, Khariton, Ulyana, Yakov! Super low quality bag, just bottom.

Revainrating 3 out of 5

Didn't quite buy it well, had a little trouble using it.

In principle, not bad for the money. Everything is tight up to the far wheel from the battery, if you use it in winter, the hose becomes dub and the length may not be enough. 32 wheels shook quickly. while a friend pumped up 2 of his 29x wheels with a regular compressor, I pumped up my 32s and his pair. heats up, after a set of wheels it is desirable to arrange a smoke break. for the pressure gauge to determine the pressure, the compressor must be turned off, but this is probably due to the air

Pros
  • The price is affordable. pumps fast
Cons
  • short wire and hose.

Revainrating 4 out of 5

Good product, more pros than cons.

In principle, the pump is not bad, but it has a number of trifling flaws, these little things bring their drawbacks. One of the jambs is the gap between the cylinder and the cooling radiator, which is why it heats up and runs noisily. We take an aluminum plate, bend it and insert it between the cylinder and the radiator. It works much quieter and heats up much less, the radiator starts to work correctly.

Pros
  • Basically its worth the money. 29 inch wheel off SUV from 0 to 2.2 pumps 1.5 minutes
Cons
  • It gets very hot when inflating one 29-inch wheel from 0 kg to 2.2 kg

Revainrating 5 out of 5

The quality is at the highest level, be sure to try it.

after refinement it will be no worse than a golden eagle but you have to take it apart polish the cylinder mirror, replace lubricant. remove the gap between the cylinder and the radiator, otherwise the piston ring will melt seal the housing, otherwise air enters the cylinder from all slots, but not through the filter a spiral hose that needs to be replaced from the kit with a regular rubber section of 8mm, at such a length it has a very poor throughput

Pros
  • powerful
Cons
  • hose complete for disposal immediately build quality

Revainrating 5 out of 5

Best thing I have ever used, highly recommended!

It heats up a lot during operation, it would be nice to have forced cooling, you don’t need to give it a long time, no 30 minutes, a maximum of 10, and a break. The wheel 225 / 75r16 pumps from zero to 2 ATM in 2.5 minutes.

Revainrating 1 out of 5

A worthless product, definitely not worth your money!

On the 3rd time of use, the piston broke at the point of attachment to the crankshaft. It can be seen that the geometric parameters of the parts are not correct. The piston was initially crooked, it is sad that it cannot be ordered separately. Large longitudinal play of the electric motor axis. Crocodiles hold on to the solder, apparently they forgot to compress the insulation at the factory. The gauge died almost immediately. In general, I do not recommend this pump and brand.

Pros
  • Good equipment
Cons
  • Quality

Revainrating 4 out of 5

No complaints, I recommend to buy.

Has some pros: Battery connection. There is a pressure release button next to the pressure gauge. You can adjust the tire pressure without disconnecting the hose. Some cons: Not a very comfortable bag. Short wire. When you swing the rear wheel, to turn off the compressor you have to go to it. It would be better if they made a long wire and a short hose. Warming up.

In general, a good compressor, however, after purchase it does not interfere with sorting out, which, on the other hand, may affect the warranty. Some pros: Price. Powerful. Critical parts are metal. Steel cylinder. Valve fastening with screws (not riveted, as in some compressors of a similar level). The pressure gauge is structurally separated from the compressor itself. The fastening of the connecting rod to the crankshaft is structurally collapsible (with a retaining ring). Cons below…