Febrytold Valve Stem Tool Set - 6 Pcs TR412 Snap-in Valve Stems + Valve Stem Cores, 1 Pcs Single Head Tire Valve Core Remover Installer Tool (14 Pcs) Review

I really like these little tool kits. The installation tool was the main reason I picked it up, but it was nice to be able to add extra functionality to my tire parts carts. I also like the included valve core removal tool. Good value for money here!

This is a kind of ordinary product. The tools that come with it are valuable. I actually use them to attach a vent (to break the vacuum when pouring) on plastic gas containers. They fit perfectly into a 1/2 inch diameter hole drilled in plastic.

Loved the valve stem assembly tool on my 12" x 7" UTV rims. Very easy as the tool screws onto the threads of the stem and the (lubricated) valve can easily be pulled through the bore with the tool. Made for what appears to be a hole in a 7/16" diameter rim.

I found these valve stems to be too small for a truck rim. They may be fine for an ATV lawnmower, but not for in-car use. The valve stems literally fall through the hole in my discs. In fact, it's not worth sending it back and overcoming all the difficulties. When will I ever find out about buying auto parts from Revain?

Works like a charm. Difficult to find smaller short sticks for repairing small trailer tires. Measure the hole first if you are unsure of the size. They fit in a smaller hole. The pry tool with grooves that snap onto the rim worked great. I bought a cable tensioning tool in the past. but the lever works better.

The standard valve stems on my car are TR413, see picture (longer above) - the valve stem is on the far right past the quarter. See picture with caps removed: Revain valve stems are TR412 and much shorter. These parts are of Chinese origin. However, everything worked fine. Will be updated if problems arise.

No cons, tire sealant was used on John Deere lawn tractors, which are prone to picking up spikes and pieces of wire, with smaller tires and wheels and for use on rough terrain remained in the yard after the house was built. In any case, these small lawn mower wheels are also more prone to slow leaks that tire sealant helps prevent. The valve stem removal tool makes it easy to remove the valve stem to apply sealant.

Recently changed tires on ATV. I didn't have those tools for the first set. I had some spare tires but no tools to put them through the rim. I used pliers and did it, but one of the rods was slightly bent. I ordered this kit for my second set of tires and changing the stem went much better. Just lather and stretch a little. The valve puller also worked a lot better than the little cross tool we've all seen so many times.

Right after I got this in the mail I had to change a small tire on our mower. It had to be fitted with an inner tube and they are notorious for having difficulty aligning the valve stem with the hole in the rim when inserting the inner tube, fitting the tire back around the rim and inflating it. This tool solved that problem pretty well as it could be screwed onto the valve and held in place while the whole thing went on. Very easy. Added bonus in the form of extra valves, stems and a stem…