Description of Charger Battery Service Expert PL-C010P gray
The Battery Service Expert PL-C010P charger is a real device for professionals. The choice of charge current from 2.5A to 10A covers almost all available capacities of motorcycle, as well as automotive and industrial batteries up to 240Ah. The recommended mode is 6A for the most common batteries with a capacity of 60-65Ah.
Charging steps: 1. Waiting for Battery The charger is plugged in and waiting to be connected to the battery. If the battery is not connected within a few minutes or a faulty battery is connected, an error will appear on the LED panel.2. Voltage measurementMeasuring the residual battery voltage. The result will be displayed on the device panel with LEDs. With this test, you can determine, without the use of other devices, the approximate battery level and charging time.3. ActivationCharger, activates and prepares for recovery discharged batteries from 2V4. Recovery If the battery is deeply discharged or sulphated, a special recovery mode will start until the battery can be charged normally. The mode works from 4V-4.5V5. Basic DC charge (Bulk charge)Charging the battery with the maximum possible current that the battery can accept and the selected charger mode. The charge occurs up to the selected voltage of 14.4V; 14.7V; 16V depending on charger model and battery type.6. Charge absorptionSmooth decrease in current strength, the voltage remains unchanged (14.4V; 14.7V; 16V) which ensures the most complete battery charge.7. Charging completedCharging completed, battery check8. Storage mode The charger, in accordance with the selected mode, fixes the voltage of 13.6V / 13.8V, the current is supplied as needed to maintain the battery in a charged state. In the event that the battery is discharged, charging will return to step 5.