Header banner
Revain logoHome Page
charger liitokala lii-m4 logo

Charger LiitoKala Lii-M4 Review

12

·

Very good

Revainrating 4 out of 5  
Rating 
4.1
Automotive, 🔧 Automotive Tools & Equipment, 🔋 Jump Starters, Battery Chargers & Portable Power, 🔧 Automotive Tools & Equipment

View on AmazonView on ЯM

Media

(10)
img 1 attached to Charger LiitoKala Lii-M4
img 2 attached to Charger LiitoKala Lii-M4
img 3 attached to Charger LiitoKala Lii-M4
img 4 attached to Charger LiitoKala Lii-M4

Photos by authors

(5)
img 11 attached to Charger LiitoKala Lii-M4
img 12 attached to Charger LiitoKala Lii-M4
img 13 attached to Charger LiitoKala Lii-M4
img 14 attached to Charger LiitoKala Lii-M4

Description of Charger LiitoKala Lii-M4

Liitokala Lii-M4 is an innovative, intelligent four-channel charger with adjustable charge current and power bank function. Allows you to charge Li-ion, NiMH and NiCd batteries. CHARGE The charger will automatically detect the battery type and start charging it. Each channel has its own control button with numbers 1, 2, 3 and 4. During the charging process, the display shows the type of battery, its charge level in percent, battery voltage, its accumulated capacity, time and charge current. When the battery is fully charged, END will appear. The display backlight automatically turns on for 30 seconds when batteries are inserted or one of the buttons is pressed. The charge current is automatically adjusted and depends on the type and number of installed batteries: 2000mA for one Li-Ion battery only in the right slot, 1000mA for 2 batteries, 500mA for 3 batteries, 500mA for 4 batteries. For NiMH/NiCd: 1000mA for 2x, 500mA for 3x and 500mA for 4x batteries. Power Bank The Liitokala Lii-M4 charger can be used as a portable battery for charging various devices, thanks to the 5V-1A USB output. For power, one to two lithium batteries are used, as large as possible. NiMH batteries cannot be used in this mode. USB does not work if the device is connected to a 220v network. DC input: 5V/2.0A Charge current: 500mA for 4 batteries, 1000mA for 2 batteries Output voltage Ni-MH/Cd 1.2V: 1.42-1.55V; Li-Ion 3.8V: 4.35V; Li-Ion 3.7V: 4.2V

Reviews

Global ratings 12
  • 5
    7
  • 4
    2
  • 3
    0
  • 2
    2
  • 1
    1

Type of review

Revainrating 5 out of 5

A great option for this money, I definitely recommend it!

Everything is fine, I'm glad that there is a test function, it charges, then the battery is discharged and then it charges again, so the capacity is calculated and the discharge charge cycle drives off)

Pros
  • Charges and discharges
Cons
  • Did not reveal

Revainrating 5 out of 5

Great product, best quality.

I recommend. Pros: Excellent recharger. Surprisingly, I put half-dead 5 year old GPs back on their feet at ~85% of their original state. New other batteries charge quickly. Some cons: There is no USB adapter for 220v in the kit, but nowadays it looks more like a slight inconvenience.

In general, charging is normal, if you look at it only in charging, there are many minuses in everything else. The screen does not always show the correct battery percentage. Each time it shows differently, if you pull out and reinsert the battery, it will be a completely different number. Also, 2A charging is used only on one socket when charging only one battery. When charging two batteries, only 1A is used, while when charging three or four batteries, only 0.5A each is used. I would advise…

Cons
  • Didn't live up to expectations

Revainrating 5 out of 5

Perfect product for any user!

Good charger, test mode is a great feature, I checked all the batteries, signed the capacities. Charging current 2A is divided into all banks. Accordingly, 2 to 1A is possible, the third one is inserted - it changes automatically at 500mA. Li-ion 18650 charges without problems.

Revainrating 5 out of 5

Good quality product, I rate this purchase excellent.

Got pros: Functional, for all types of batteries. There is a convenient bright screen. Several operating modes. Setting the mode for each slot. Adequate price. With its cons: Separate power supply. With such dimensions, it is probably possible to build it into the case.

Revainrating 4 out of 5

Good value for money, I recommend it.

Received yesterday. Brought, put on charge a set of batteries. Batteries are charged. Today I decided to check the test mode. I put in the battery. It shows 47%. Surprised. Pulled it out, put it back in. Showed 67%. Even more surprised. Twisted a little inside the charger. Showed 99%. Other batteries showed the same uncertain results: sometimes 40, sometimes 70, sometimes 99%. I have a complete misunderstanding of what is happening. Downgraded for this only.

Pros
  • You can see at least some information on the level of charge and charging, automatically interrupts charging at the end
Cons
  • Little is clear, even despite the instructions in 2022

Revainrating 2 out of 5

Does not meet my expectations, it was not worth buying.

I stupidly took it to Ali, it’s good that I managed to cut down 50% of the price in a dispute, I proved on the video that nothing works as stated, and the instructions are obviously delusional in meaning, so for $ 9 on the fact of a refund, lying around in a box, I charge her old ones 18650 from a laptop for flashlights sometimes, because enough of them in flashlights for a long time, it is no longer good for anything, it can’t even refresh old dead Ni-Mh batteries, as well as measure the…

Pros
  • Yes, no, taking into account the declared functions, except that it can charge lithium.
Cons
  • There is no question of the possibility of charging Ni-Mh - there is no normal fishing -dV, there is no temperature control, it kills eneloops at once by recharging by 300mA, and above this this is no longer a sparing mode for AAA. Contacts are like from a Chinese basement - you insert AAA Ni-Mh tightly, but he doesn’t see it, the bounce of contacts is simply monstrous, you can’t even touch the battery with a finger immediately disappears from the slot, compared to the same BC700 purely under Ni-Mh, although this one too - dV at 200mA does not catch steadily killing batteries, i. E. there is also no gentle mode. The Fast and Normal modes are delusional - there is no discharge and charge mode with capacity measurement while discharging the remainder on Ni-Mh. You insert it with a voltage of 1.35V +, and it does not even try to discharge and charge it either in Fast or in Normal. Stupidly charges and stops. Testing the resistance of Ni-Mh batteries does not work in fact, it seems all the time the same value of 52mOhm on all batteries, newly bought eneloops and dead trash, which cannot even give 100mA of current in a discharge, and even with lithium, the measurement accuracy is simply awful - plus or minus bast shoes, i. E. essentially nonsense.

Revainrating 2 out of 5

I do not recommend spending your money on this.

The device is everywhere advertised as being able to charge and restore any battery. In fact, it can only work properly with fresh and good elements. As an example, nimh aa element from gp at 1600mah, discharged to 1v This device refuses to detect it. You insert it into the charger from gp 20 years ago, charging went. And only when it is charged up to ~ 1.2v, this charger begins to determine it.

Pros
  • usb-c connector, the ability to use as a power bank
Cons
  • the test is useless, the capacity indicates from the bulldozer, it can show 300 mah, then 800, then 150 on the same item. does not indicate the capacity of nimh elements, although the test runs does not charge heavily discharged cells (less than 1.2v for aa and less than 3v for 18650), writes error although everywhere it is advertised as a miracle device that can restore almost any battery fast charging for liion does not work. after choosing a current of 1A after a couple of seconds of charging, it changes to 0.5