💡 Circline 85 260V Replacement Fluorescent: Your Essential Solution for Fluorescent Replacement Review

The wiring diagram that came with the lamp was the same as that on the Revain sales page. This is a clear indication that all magnetic or electronic ballasts must be removed from the lamp circuit. Exactly how this should be done depends on the buyer. In my case I have an architectural lamp with a transformer at the base where the lamp is attached to the table. I had to open the lamp base and disconnect the transformer from the circuit. The connection diagram clearly shows the 4 wires going to…

Easy installation. First, I turned off the power. Old bulb and ballast removed (two screws). I cut the wires that supply black and white power. I connected the included adapter that goes to the lightbulb. The adapter has 4 wires. white and grey. Connect both whites together with the white from the fan together. Then I connected 2 grays to a black. I used a butt connector to join the wires. I also changed the included holders. The fans were all metalheads. The supplied ones have plastic or…

If you've spent countless hours under the lights of an old Ledu store, you've probably noticed that the color codes aren't that bright and parts "out of country" sometimes appear gray and mix up purple. This flashlight is a great upgrade! My flashlight had the ballast removed from the box above the stem, which plugs into a bolt-on table mount. The neutral wire was moved to the (now unused) red wire. At the top of the bracket, loosen the two screws that secure the switches. Remove strain relief.