COMeap Power Adapter Workstation 12 Inch Review

『24P - 6P』24 Pin end to plug into the standard 24 pin ATX Power Supply (It is available that the black GND wire is in the 5th or 6th pin of 24 pin end port. Please do not worry about using.), standard 6 Pin and small 6 pin P2 ends to plug into the HP motherboard; (NOTE: Please do not forget connecting the ATX 4 pin cable of your replaced power supply to the CPU 4 pin port on your motherboard.). 『Best Solution & No Annoying Beep』Allowing you to convert standard 24 pin ATX power supply to 6 pin HP server workstation connector. The updated one eliminates the fan error beep.(Note: It maybe cause the "power supply fan not detected" error when to use it on the HP Elite Desk G2/HP Prodesk 600 G2 micro tower type.);. 『Compatibility』Compatible with HP Z200/Z210/Z220/Z230/Z240 SFF server workstation, HP ProDesk 600 G1 SFF/600 G2 SFF/690 G1 SFF, HP EliteDesk 800 G1/800 G2/600 G1/880 G1 SFF/TWR, HP Compaq SFF/MT/CMT Series(4000 4300 6000 6005 6060 6080 6200 6280 6300 6305 6380 8000 8080 8100 8180 8200 8280 8380)(NOTE: The listed types are only for your reference. Please check the image 4th to confirm if it works with PC type.);. 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length: 13inches(33cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs;. 『Note』The image 4th is just reference picture of original P2 connector, not our cable's picture. Please carefully check the image 4th of original P2 connector with wires. It was only designed for some types of HP PCs as listed. If you connect it with other incompatible types, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it;.