🚰 Dual Compression Outlet Angle Stop Valve, Plumbing Fitting, Quarter Turn, Single Handle, with Multiple Select Positions, Water Valve Shut Off 1/2" NOM (5/8" OD) x (3/8" x 3/8") Review

This multiple switching valve allows you to shut off one or the other outlet, unlike a traditional valve that turns all outlets on and off at the same time. This is surprisingly handy if you need to replace one of two connected appliances and can't do it right away (e.g. repurchase a dishwasher). ). new dishwasher). Very durable and well built.

I had to replace the shut off valve under the sink when I installed a new dishwasher. I currently have 2 separate valves, one for HW and one for LW. Both are open. I cut the copper just before the first valve. Cleaned and prepared the copper for the compression fitting and installed this valve. What I like about it is the ability to disable each feed individually. The only one I could find in the box store only had one option. Both on or both off.

I used both sizes for the kitchen sink: 3/8 inch outlets + 3/8 inch outlets for the hot water supply of the faucet + dishwasher and a 3/8 "Outlet + outlets 1/4" for supplying cold water to the tap + reverse osmosis. The last 1/4" outlet can also be used to connect directly to the fridge's water/ice dispenser (although in my case the reverse osmosis system powers the fridge). These faucets replaced two tees and four check valves (all four of which eventually leaked), while freeing up space under

This worked great, but one thing to keep in mind. It's not just an on/off valve, it actually has 3 positions to close one or both outlets. This might be a nice feature, but it's not so obvious which ones are enabled or disabled. No installation hassles - just twist until both work, but if you only need to turn one off it's not that easy to tell if one or both are off. Not easy but not impossible because it is marked from the front, although difficult to see and a bit difficult to interpret. If…

I was looking for a quarter turn dual outlet shut off valve to replace the old multi turn hot water shut off valve for our kitchen faucet and dishwasher. Luckily, I came across this valve for about the same price (Home Depot was more expensive and Lowe's was completely sold out), but it's a lot better. the possibility of turning off the tap and starting the dishwasher at the same time or vice versa, or of course turning off both functions at the same time. It's nothing I couldn't live without…

I needed to replace 2 dual outlet rotary valves for my kitchen sink that were not closing completely. I didn't want to replace them with new multiturn valves, I wanted 1/4 turn valves. No hardware store near me had dual outlet angle 1/4 turn valves and they didn't think anyone made them. After spending a lot of time searching the web I finally found this on Revain and it was the perfect replacement for me. The replacement was no more difficult than replacing a standard single-outlet angle check