Header banner
Revain logoHome Page
๐ŸŽ›๏ธ hima modulator regulator controller logo

๐ŸŽ›๏ธ Hima Modulator Regulator Controller Review

3

ยท

Poor

Revainrating 2.5 out of 5ย ย 
Ratingย 
2.3
๐Ÿ”Œ Electrical Controls & Indicators, ๐Ÿ’ก Industrial Electrical

View on AmazonView on ะฏM

Media

(4)
img 1 attached to ๐ŸŽ›๏ธ Hima Modulator Regulator Controller
img 2 attached to ๐ŸŽ›๏ธ Hima Modulator Regulator Controller
img 3 attached to ๐ŸŽ›๏ธ Hima Modulator Regulator Controller
img 4 attached to ๐ŸŽ›๏ธ Hima Modulator Regulator Controller

Description of ๐ŸŽ›๏ธ Hima Modulator Regulator Controller

Parameters: motor speed controller input voltage range is 9-60V, output current range is 0-20A, continuous power is 1200W. Application: the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles. Speed Control: our motor control board can regulate motor speed by potentiometer; what's more, it support clockwise/anticlock-wise rotation adjustment. Easy Wiring: thick red wire for the positive of the power supply, and thick balck for the negative; thick blue wire for the motor positive, and the thick green for the motor negative. PWM: the advantage of using a pulse width modulation (PWM) method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient.

Reviews

Global ratings 3
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    2

Type of review

Revainrating 1 out of 5

Not ideal for driving trolling motors

I'm sure it can be used in other places but it's not ideal for building a trolling motor control box. I don't want this switch to get stuck or splashed in the rain. It is not sold specifically for this, only for other people considering such use. The low rating is because you can't flush mount the switch in the box without cutting and splicing the wires between the switch and the controller. or disassemble and solder

Pros
  • Application: DC motor driver can be used to control brush motor speed and adjust light brightness in DC circuit. Note: The motor cannot be used in electric vehicles.
Cons
  • Big and bulky

Revainrating 5 out of 5

Worked great until it stopped

Connecting the wires was easy, but I spent hours designing and building a pedal to turn the control knob for my baby flywheel. Amazing worked for a day or two then died. When I double check, the knob still changes resistance, but the box just puts out full power the entire time. It wouldn't have been a big deal if I hadn't spent so much time on the control pedal system just to achieve this. Was well under a 20A rating so this is very disappointing.

Pros
  • Speed Control: Our motor control board can adjust motor speed by potentiometer; In addition, it supports clockwise/counterclockwise rotation adjustment.
Cons
  • faded

Revainrating 1 out of 5

good dc motor speed controller

I have several of these controlling a small turntable welding table, ball feeder etc and they seem to work fine and have been working for a while. If I had one small problem it would be that in order to install the forward/reverse switch in a closed box with a faceplate you have to remove the shrink wrap around the switch so it fits snugly and remove and resolder the two wires coming from the switch. I usually just replace spade terminals anyway, but that's about the only improvement I canโ€ฆ

Pros
  • PWM: The advantage of using the pulse width modulation (PWM) method for dimming/speed control is that it can fully utilize the energy of the power supply and the circuit is very efficient.
Cons
  • I am texting back