Craftopia'S Magnetic Sheet Roll - Perfect For Crafts! Create Die Cuts, Cards, And Car Magnets Easily Review

Massive let down. It is not able to stay on a metal grate at all. No magnetic pull, not even on itself! Big waste of money. I can’t use a single piece of this product and cut a piece off to test the product so return is not possible. Avoid if you need something that will lay flat. This wouldn’t stay over my grate and always rolled in on itself, even after days of being out of the roll.

I purchased this item to glue into hobby boxes as a magnetic base. While they are easy to cut to size and shape, the magnetic adhesion is not fantastic but is adequate.The real problem is that it is almost impossible to flatten them into sheets, AT this point I'll leave them in the garage under heavy boxes for a month or so.two months later still not flat

Applied decals to the white smooth surface and used good sissors and just cut the access from around the decals and put them on a flat or curved metal surface

The magnet is not particularly adhesive. I purchased this in order to cover several vents. While the magnets stick to the vents it only worked when I could lay it completely flat against the vent. By that I mean each button, lever, and/or screw had to have a space cut out of the magnet in order for it to stick. Any small bump, such as a screw, and the magnet wouldn't stick to the vent. With that said, once those items were cut out this worked well.

I bought this to apply to laminated paper and to be used on a magnetic whiteboard. The last stuff I used was given to me but the white part peeled away to stick the magnet on whatever. I thought that’s what I was getting here. This is like a magnet with a dry erase surface. I’m unhappy with my purchase, but I’m fairly sure I didn’t read the description correctly. Will I buy it again? Not at all.

The magnet was not strong enough to stick onto a car. That was one of the main reasons I had ordered this Thanks for attention!

Using it to cover up old signage on the side of my work vehicle however you can see through it so it's not really doing what I needed it to do

Could not use this to cover steel ceiling air vents (yes, the vent metal is magnetic) despite 1 inch flush contact at borders and vent fins.Would be useful if someone with the tools could post the magnetic field strength (Gauss?).

Large roll of magnetic material. I thought it might be a little thicker but I think it will work fine for what I’m going to use it for.

we bought this product to put signs on cars for a parade.Worked well - stuck on just fine.We only could have wished for a less glossy surface so we could silk screen on it.Selller could have stated that the surface was GLOSSY.

I'm confused. The box that came to my door says 30 mil thick not 15 mil as advertised. But the roll inside does seem thinner. I just don't know for sure.Update: compared to the last 30 mil roll I ordered, this roll is much thinner.

It works really well on magnetic side but disappointed that it would not stick as good on the other side. Cuts fairly easy with scissors.

Came as described and there's plenty of it, using it for cutting die storage & will find some other uses for the rest. Thanks for attention!

This product does NOT adhere to magnetic surfaces! So disappointed! A waste of money! Wish I could get a refund! That's my review.

Used it to cover a hot water heater (added dots) . The roll of magnetic sheet was super easy to use. It cut easily with normal kitchen type scissors. Stuck well, easy to reposition and remove.

I wanted to use this to hold my die cuts on my craft cabinet doors. It's not really strong enough. There is probably a way to get it to go flat after being rolled.but I have to look into it.

Product is good compared to other similar magnetic rolls I've purchased. It is rolled tight so it takes some work to flatten. I use this to magnetize beer stickers for the beer fridge in the garage.

This is the 3rd time I’ve ordered and I use these as car magnets to advertise my business on all employee vehicles. They are great and easy to remove to clean and put right back on!

This was purchased to protect the surface of a gloss black refrigerator surface from being scratched with child's magnets. She likes sliding the magnets across the surface as she plays.There are sharp hard lumps between the white layer and the magnetic layer so even though it is flat against the metal it is lumpy on the outside. She cannot slide her magnets easily across the surface.

This is some pc of s.I did cut square from it 10"x10" and one it doesn't get flat (it comes from the roll) I even for few days put it flat on the table, put some wood board and put some weight on it. It just doesn't get flat. And it doesn't stick to any metal. Don't know if there is any magnet in it.CAN I RETURN IT IF DID CUT SOME PART OF IT?