CRJ 4 Pin Molex Sleeved Adapter Review

Used cable from the power supply and supply of 3 fans no problem. These are large, low-speed fans that move large volumes of air silently. The structure was fine. Be aware that these old style power pins are difficult to align, but after a few tries they came together easily.

As advertised. I built a useless ultra-low budget PC using a ten year old Mini-ITX server board. It only had one case fan header while I had three performance fans. Knowing I wouldn't be controlling the fan speed anyway, I decided to use it to connect the fans directly to the power supply. Went like clockwork. It seems a bit cheap, but that's because it's cheap! It does what it's supposed to do and you'll probably keep it out of sight.

This cable was the only thing I missed when trying to connect multiple fans in the computer case. This minimized the number of Molex cables I had to have in my case since some older models only have one fan header.

This is the largest number of single Molex fan headers I've found and works well with 2 additional 1 diameter case fans of 120 mm that I have. and 1000 rpm. Its decent quality and it was great that the connectors support 3 or 4 pins. Just note that the converter only provides 2 pins per fan. I didn't care as I knew I couldn't control the fan speed without connecting fans to the motherboard.

I just received it today. obviously not the best quality. I tried 2 in a batch of 3 contacts and everything was fine for me. So it's a bit pricey for what it is, but it's not the end of the world for $7.

Bought for my new case fans. I have a total of 6 fans, 4 are now connected to this cable via molex pin. It has been working for several months, an average of 10-12 hours a day. plug and play Didn't have the issues that others have mentioned regarding post processing of the pens etc.

Smoke came out of my PC case. Upon inspection I found that one of the wires had melted. It took me less than a day. A complete scrap! Also, the pins were installed poorly as others have stated. Do not buy!

This cable has a nice design as shown in the photo. The only issue some users may find difficult is that it uses the first 12v pin and not the second and most HD power supplies use the 3rd pin (the second 12v pin). Moving the pen from the second to the third is very easy, all you need is the right tool. If you don't have one, you shouldn't play with these cables at all.