Header banner
Revain logoHome Page
daiertek latching button waterproof maintained logo

DaierTek Latching Button Waterproof Maintained Review

3

·

Average

Revainrating 3.5 out of 5  
Rating 
3.3
🔌 Electrical Controls & Indicators, 💡 Industrial Electrical

View on AmazonView on ЯM

Media

(4)
img 1 attached to DaierTek Latching Button Waterproof Maintained
img 2 attached to DaierTek Latching Button Waterproof Maintained
img 3 attached to DaierTek Latching Button Waterproof Maintained
img 4 attached to DaierTek Latching Button Waterproof Maintained

Description of DaierTek Latching Button Waterproof Maintained

Latching Push Button Switch: Press the button - POWER ON, Release your finger - Maintain POWER ON, Press the button again - POWER OFF. It's SPST Normal Open Self-Locking Pushbutton Switch not Momentary. 12mm Push Button Switch with High Round shape Button and Power Symbol, Aluminum anodized Black Metal Push Button switch. 12V Push Button Switch with Wire Harness for easier connection of circuit. Green wires for SWITCH+ and SWITCH-, RED and Black wires for BLUE LED (LED doesn't distinguish between positive and negative). IP65 Waterproof push button switch with 12 Volt BLUE LED Lighted (Also Can be used on 120V, just need to add a 150K Resistor on one of LED pins), can be used in ourdoor, wet or dusty environment. This Push Button Switch is widely used to Control LEDs and Circuit,can be used on Car,RV,Boat,Marine,Vehicle,Auto,Truck,Househood,Coffee Machine,industrial equipment,Medical Equipment.

Reviews

Global ratings 3
  • 5
    1
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    1

Type of review

Revainrating 4 out of 5

Misassembled

In 5 out of 6 sockets the cables were in the wrong position (see picture). The wiring harness on the left is OK. In the right one, the green pair and the red/black pair are swapped. Fortunately, the cable connector was also misplaced. The red and black cables must have the protrusion on the cable connector pointing outwards from the socket. While green wires should have the tab of the plug pointed toward the center of the outlet. Push until you hear a click.

Pros
  • Latching Push Button Switch: Press the button - POWER ON, release your finger - hold the POWER ON, press the button again - POWER OFF. This is a normally open, self-latching SPST push button switch, not a momentary one.
Cons
  • Expensive

Revainrating 1 out of 5

Garbage of the hottest form.

You look good, that's all. Their quality is absolute rubbish. The button dangles and doesn't hold orientation, the back of the switch that houses the wiring harness only came loose when the wiring harness was disconnected from it, and its tiny interior flew into the abyss. Unfortunately they sat in my tool box for several months before being installed and I can no longer return them. Save your money, this is hot junk.

Pros
  • 12mm high round pushbutton switch with power symbol, Black anodized aluminum pushbutton switch.
Cons
  • Crumpled

Revainrating 5 out of 5

Update: Anyway done, take a close look at the back of the switch

From what I've read in the reviews that aren't flagged (they definitely are), you really need to use your eyes and look DOWN NEAR THE PINS! Appearance of decent quality, brightness is sufficient for my application. My only concern is whether they will be strong enough for my application. The size is perfect, the strength is there. I will update after installing and a few days of usage. Update: Three out of six failed after four uses. Definitely not usable in soft automotive applications! The…

Pros
  • 12v Pushbutton Switch with Wire Harness for easier circuit wiring. Green wires for SWITCH+ and SWITCH-, RED and black wires for BLUE LED (LED does not distinguish between positive and negative).
Cons
  • Little things