Descender Petzl Rig Review

Compact descender Compact RIG descender with automatic locking function. Designed for cable access specialists. The ergonomic handle allows you to smoothly adjust the speed of the descent. The AUTO-LOCK system automatically moves the device to the locked position when the handle is released. Additional rope fixation is not required. The device can be installed or removed from the rope without disconnecting it from the harness. The point of contact with the rope on the side plate is additionally reinforced with a stainless steel overlay. Easy to use: - markings on the body indicate how to properly install the device on the rope; - the handle allows you to precisely adjust the speed of descent; - two working positions of the rope: through the side plate with a bend in the rope and through the V-shaped channel without changing the plane of the rope; - AUTO system -LOCK automatically puts the device in the lock position when the handle is released. Additional rope fixation is not required; - when the handle is in the locked position, the user can perform short lifts (using ASCENSION and FOOTAPE) without additional handling of the handle; handle. This technique is similar to the GRIGRI2 technique; the device can be attached to or removed from the rope without disconnecting it from the harness. This simplifies the passage of intermediate points; - the handle automatically switches to the transport position as soon as you remove the device from the rope. This reduces the chance of snagging when transporting the device on your harness; The contact point with the rope on the side plate is additionally reinforced with a stainless steel overlay. Working load limit 200 kg (more information in the instruction manual) Article: D021AA00Weight: 400 g Working load limit: 200 kg ( see instruction manual for more information)Certifications: EN 341 class 2A, CE EN 12841 type C, CE EN 15151-1, NFPA 1983 Technical Use, EAC-EN 341 class 2A when used with PARALLEL 10.5mm or AXIS 11mm rope;- EN 12841 type C when used with 10 to 11.5 mm ropes conforming to EN 1891 A; - EN 15151-1 when used with 9 to 10.5 mm ropes; - NFPA 1983 Technical Use when used with 10 to 11.5 mm ropes; Warranty: 3 years Country of origin: France