🔥 DORMAN HELP! 76850 Choke Heater Tube Kit: Enhancing Engine Performance for Optimal Choke Functionality Review

Cord was brittle and broke during installation. The fittings (shown to the right of the pipe in the product photo) are also very cheap metal which broke trying to install them. Dorman usually makes decent products so I was surprised at how poorly this was done.

Here's a funny story. I couldn't really use it. The bracket cover it connects to is rusted on the screw. Clumsy position in the engine and two days later I gave up. However, the product is of good quality and meets all the requirements. I'm just sad I couldn't use it.

Easy installation on 351W. I removed the star because the hose was not attached to the installed fitting. The tube just sits there, relying on the tube's spring force to hold it in place. Another star deducted for not installing the nut and compression fitting on the OEM cone fitting. Instead of using a compression fitting, I had to flare the tube with a flare tool. Luckily the compression nut is tapered and seems to work.

You get a spool of thin wall aluminum tubing and some connectors and a piece of insulation. At the same time, you can easily and quickly make a muzzle tube. Be careful when straightening the coil - I used my hands and worked slowly. Did it in exactly ten minutes or so. Pay attention to the correct connection dimensions - had to find a different end for my application. The ends of the insulation will fray, but if you put small zip ties on each end, it will hold up well. I actually painted my…

The throttle body heater kit I bought didn't have a 1/4" brake line. I bought a yard from a local brake shop but the kit itself worked fine. all Components are compatible, the best way to solve the brake line bending task is to first tighten a piece of wire coat hanger properly and then use it as a template for the brake line if you don't have a brake line bender (pliers) and don't want to buy these for a job, you can You will use the larger head from your headset to get a good bend.You will…