Description of π₯ Easycargo 20Gr Thermal Paste Kit: Superior Heat Transfer for Optimal Performance
20 gram white thermal conductive compound paste/grease. Odorless, low oil content, non-volatile, non-corrosive, non-toxic, flame retardant. Thermal conductivity > 1.42 W/m-k. Thermal resistance < 0.252 k-in/W. Working Temperature: -30/280Β°c. Can be applied for cooling the interface of heatsink and LED CPU GPU IC Chips VGA Transistors.
Used this on a Behringer Inuke nu6000dsp which I have overhauled and after 4 months it is still running with no overheating problems. Note. There's a lot more paste in this little jar than you might think. I could probably fix 25 amps and have some left over.
The worst paste I've ever used, I've tried 3 times and all 3 times the same result. Under full load my CPU temperature jumps to 97C. And at idle it stays at the 50Β°C level. Meanwhile, before I replaced my old thermal paste, my idle temperature was 32Β°C and at full load it was 65Β°C, so this paste made my computer run much worse than it was.
My 17 year old garage door opener (old fashioned) is intermittent. I opened it up and plugged the connectors onto the board, there was a power/signal error. I use this conductive grease on the silver 1/2 long pins that the board connects to. How corrosion is not visible to the eye. Now it works, but there can be a bad board that flexes and loses power with use.