Executive computer chair Bureaucrat KB-9N, upholstery: mesh/artificial leather, color: gray Review

Unbiased assessment of the product.There are no questions about delivery, the courier arrived on time. Raised to the floor and carried to the apartment.

The seat depth is just suitable for someone of my height (170 cm), which is a definite plus. If you don't mind the disadvantage (discussed further down), it's a good value for the money. Having drawbacks of its own. The holes for attaching the backrest to the seat needed to be redone because they were off by about a centimeter.

Various advantages: The price is lower than that offered anyplace else by 15%. Every location sells the same version of the product. Box from the factory. Full set. Cons: The quality is just average. Somewhere that requires you to press in order to press. The lady has decided not to collect.

Got pros: The back is ventilated, and the lumbar support is satisfactory, making this chair suitable for extended periods of use. Cons: 1) After a week of usage, the gas lift began to make noise; 2) The wheels don't fit well in the seats, and everything in the car rattles.

The benefits of it include: Three different armchairs were purchased for the group. Collecting went off without a hitch. The employees seem to be enjoying themselves, and the seats provide a pleasant seating experience. Con's: The reliability of the product is not yet known, however the maker guarantees a warranty good for three years.

Various advantages: As soon as I sat down on this chair in the bureaucrat's official retail store, I noticed that it had rubberized wheels for laminate flooring and that it was really comfy. Having certain negative aspects The day before yesterday, they brought the chair, left it at room temperature for four hours, then constructed it according to the directions. When they sat down to examine it, the seat all cracked, as if there had been cardboard instead of plywood. Kindly install a seat of…

I purchased a second chair at the end of July, but I did not start putting it together until today. I have been using the first chair for the past two years, but the second chair did not come with a full set of fasteners. Instead of four screws for fixing the backrest and four screws for fixing the seat, they put three of each, and it is too late to present the supplier with the same fasteners at this point.

The assembly process was simple and took only around 20 minutes. Before securing the back with the remaining four screws, you should inspect the screw holes for debris (I didn't bother with this step). By pushing the pedal in or out horizontally, the rocking mechanism is actuated.

You still have work to do to bring the chair up to a 5k rating; fixing the armrests and figuring out what kind of soft thread will work would be big improvements.

The chair back could not be installed straight from the box because the screw holes did not line up. I needed a cylindrical file, which I could have been without in theory, to bore it. I tried it on four times; twice it fit like a glove, once it needed a little sharpening, and twice it was just about right. Obviously, I picked the wrong weekend activity. The size of the tin becomes evident if you read all of the reviews in order, and I regret that I just read the bad ones before making my…

Includes low-gas-lift. As soon as I could, I swapped it out for a larger one and now my seat is 60 cm from the ground. Exactly what I've been looking for. benefits and advantages. elegantly suited to a 200 cm height. Adjustable height for lumbar protrusion; pleasant till the replacement unit stops working. Three-year guarantee. The armrest attachment bolts are poorly welded into the frame, which is a major drawback. You should take an objective, non-critical stance. The armrest covers slide…

I've been using this chair at home for over a year, and while I am familiar with it in theory, I haven't given it up since, despite the fact that it required a lot of effort to acquire, it has served me well and has given me no cause for complaint. I should have lubricated and sealed the joints of everything that is screwed with a rubber expander on the first day, but instead there is a dreadful squeak throughout the entire flat. The seat is too lengthy for my 177 cm frame; when I lean back, my

Nice nice chair! It's been a month already. There is not a single creak, everything functions normally, and there is no discomfort or inconvenience anywhere. It has been ten months, there have been no complaints, everything is fine, nothing creaks, nothing hangs out, everything works fine, and there have been no issues. The benefits of it include: This chair is quite comfortable! That's your asking price! Even though I am 66 years old, sitting for lengthy periods of time does not cause my legs…

The bushings on the chair's tilt axis disintegrated after only a few weeks of use. The chair is shaky now. No more weight was added than was allowed.

In my case, a week is the norm. The gondola's gas lift is in good working order. It comes off on its own after a month of use. The gas lift on two of this company's chairs has stopped working. Superior quality is available for separate purchase. Three months into the use. The padding in the seat nevertheless conformed to the shape of the body, making for a pleasant sitting experience. The use of mesh in the armrest wrapping is both practical and stylish. Unlike leatherette, which quickly wears…

The chair is great, and putting it together takes no more than 30 minutes. The quality is excellent and trustworthy. My height and weight of 190 centimeters under the scales worked out well. There is no squeaking or dangling.

In general, spending your money here won't be a problem. However, you will be required to either send the swing mechanism back or modify it on your own. Has pros: The actual seat itself is constructed quite well. The selection of materials is completely appropriate for the job at hand and the cost of the project. because of the stretched mesh in the back, the seat is wide and pleasant, and the back support is typical. There is a mechanism for swinging. The mechanisms that are used to construct…

I purchased it in "quarantine" since, before to then, I had not sat at the table at home for an extended period of time and my back was starting to complain. I went with a budget option that was not leatherette, had adequate ventilation, and had lumbar support. The armrest mounting holes did not line up perfectly, so I had to slightly bend one of them when assembling this model. The chair was fixed after 3–4 days of assembly, but tightening did not address the issue. The chair is a little lower

Very simple assembly required. They spend the standard 15-20 minutes writing. Fixed all the loose ends. Creaked when I sat down and let go of the lever. The wife, tired of hearing the house creak all day, begged to be done with it or threatened to do something herself. I tried using silicone lubricant, but even after missing nothing and tightening all the bolts, nothing changed. He listened and heard squeaks from the door knobs. When he relaxed his grip on the side bolts just enough so that the

The lumbar braces keep coming undone. Fixing it is a breeze, thankfully. Small objects and wool can become caught in the mesh, which may irritate it. I find that it is much more comfortable than leatherette (real leather comes at a much higher price), and I think it is the best option available at this price point.