Header banner
Revain logoHome Page
fan kit for case id-cooling df-12025-argb trio logo

Fan kit for case ID-COOLING DF-12025-ARGB TRIO Review

4

·

Average

Revainrating 3.5 out of 5  
Rating 
3.4
Computers, 💻 Computer Components, 🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(16)
img 1 attached to Fan kit for case ID-COOLING DF-12025-ARGB TRIO
img 2 attached to Fan kit for case ID-COOLING DF-12025-ARGB TRIO
img 3 attached to Fan kit for case ID-COOLING DF-12025-ARGB TRIO
img 4 attached to Fan kit for case ID-COOLING DF-12025-ARGB TRIO

Photos by authors

(1)
img 17 attached to Fan kit for case ID-COOLING DF-12025-ARGB TRIO

Description of Fan kit for case ID-COOLING DF-12025-ARGB TRIO

Cooling type: Active (fan); Production material: Plastic; Number of fans: 3; Fan dimensions: 120 x 120 mm; Fan thickness: 25mm; Fan bearing type: 2 ball bearing; Noise level: 16.2-31.5 dB; Airflow: 56.5; Fan speed: 2000; Power: 12V; Backlight: RGB; Dimensions: 120x120x25 mm

Reviews

Global ratings 4
  • 5
    1
  • 4
    0
  • 3
    3
  • 2
    0
  • 1
    0

Type of review

Revainrating 3 out of 5

The product is the most common, it could be worse.

I can not advise them to buy, but as a budget option it will do. after adjusting the speed graphs in the bios, I was able to achieve almost complete silence. the minimum speed is 600, at 750 it is already becoming audible. if adjusted so that they do not rotate above 700, then it is quite quiet and blown.

Pros
  • good air flow, appearance, including the quality of the glow (does not flicker, shimmers smoothly, but in rare cases it is buggy, more on that below). It is also worth noting complete rubber stickers. there are twice as many of them as needed, they are convenient to glue, useful for fans that were already in the case.
Cons
  • noisy, complete fasteners - self-tapping screws and bolts. self-tapping screws do not cut holes as easily as we would like, and bolts without nuts. I ended up having to fix it with zip ties. the backlight sometimes freezes when switching modes and some LEDs are lit by themselves even after a complete disconnection from the power supply. after a while everything goes back to normal.

Revainrating 3 out of 5

I can't say that I was completely satisfied with the product.

Most of all, I didn’t like their noise, I have a quiet assembly (half of the fans stop completely) and a specific sound is heard very well from these fans . It's a pity that the type of bearing was incorrectly indicated in the store, so I would have taken a long-proven Hydrodynamic bearing And that the declared noise level of 16dB at 800 rpm is clearly exaggerated Its pros: RGB backlight Has rotation adjustment Relatively inexpensive price Its cons: Noisy Self-tapping screws are screwed in very

Revainrating 5 out of 5

Great product, a pleasure to use.

I bought two kits, installed them quickly enough. The kit includes anti-vibration material for installation on fans. There is also a complete set of wires with various adapters-splitters and extension cords for connecting fans with ARGB backlight or tape. Each kit includes a 4pin PWM splitter with three outputs, on the first chip in the chain there are 4 pins, on the next 3 pins. There is also a splitter for ARGB tape powered by 5V with four outputs and a simple extension cord for it. The…

Pros
  • Beautiful, quiet, good equipment, 900 - 2022 rpm
Cons
  • Didn't find it.