Gaming computer chair Zombie VIKING-6 KNIGHT, upholstery: imitation leather/textile, color: blue/black Review

Discussing my personal usage.Some pros: Very reliable chair with my weight of 130 everything is ok. Cons: Armrests flimsy, could strengthen it would be chic.

Who thought to buy or not to buy, of course to buy: Firstly, I did not find cheaper and better. Secondly, for tall people, that's it. Thirdly, when you touch the fabric, you immediately understand that only silk is more pleasant) Has some pros: The chair is beautiful and comfortable. The quality of the seams and the materials themselves are not bad. It's not hard to assemble, but it will take time. I sit without problems with a height of 185cm. The fabric is blown and you do not sweat like with

Unveiling my truthful assessment.Has some pros: Comfortable anatomical backrest with headrest (pillow) Different cons: Not revealed yet. The price could have been lower.

The chair itself lived up to expectations. I specially chose a fabric coating, not plastic-vinyl, to which you stick in the heat. Widely spaced legs-support, stands steadily. The wheels, however, spin with difficulty, which is why the chair rolls, let's say, with difficulty. But I think it will work out. For my height of 185 cm, the seat height adjustment is enough, but the pillow is below the neck. In general, a very comfortable chair for the home, I recommend it. Separately about delivery…

The chair is easy to assemble by yourself, but I ran into a small defect in the plastic inside the seat - the bolt simply did not fit into the groove. In general, the chair would justify its price, if not for the terrible creak.

1. There were no long bolts for fixing the seat. Therefore, it was not possible to install plastic washers. Perhaps there would be no knock from the washer when the chair returned from the reclined state to its original state. 2. A metal cross has arrived (according to the description). The holes on the cross don't line up completely, so half of the bolts are angled. It took a lot of fiddling to fasten the seat armrests and backrest: it took quite a bit of effort to bend everything and combine…

I took it as a makeshift, instead of a dead home chair. It's doing its job so far, nothing has fallen off. . It still performs its functions. Honestly, I'm surprised. (The gas lift in the photo is at the minimum, because it’s more convenient)

I read the comments of others, I was afraid to take this chair. But I really liked it. Still, I took the risk. Arrived the next day in a slightly wrinkled box. All components were in place, assembly took 40 minutes. I have been using the chair for more than a month, it was noticed that the chair lowers if you raised it earlier. But I don't think it's critical. Looks great, does the job, everything works fine. 72 kg on the chair holds confidently. The pillow included is great. Sitting for 8…

At first we thought it was nonsense, just buy a screw so as not to expect a solution to the problem, but it turned out that there are none like that anywhere. The Bureaucrat offered to contact the store. I had to wait 20 days until I managed to get the missing item through the store. As a result, although we provided the name of the correct part and sent photos of both the assembly instructions and the screw itself, they sent the wrong screw with a different thread. The store advised me to just

Owner of three of these chairs. Bought for myself and two family members. So every time the assembly of this miracle is just a nightmare. The bolts screw on the upholstery. The seat and back cannot be aligned evenly in relation to each other. Two chairs were assembled by two, three, fellers. One, lo and behold, gathered in one face. Broken threads in several places. Two chairs do not creak, but one creaks terribly. All three chairs are missing either washers or plugs. On the last chair there…

With its pros. Very comfortable chair, if you lean back, you can even take a nap😂 Different cons: Some holes are shifted, but they seem to be assembled normally

Check in advance for the availability of parts according to the instructions and after assembly - whether the chair is even, tried to adjust it in every possible way, but the point is in the chair itself, the curve and fills up to the right. Got pros: Convenient if you lean back completely, but only for a week, it is assembled according to the instructions, the wheels are rubberized and quiet Cons below: After a month of use, the seat became stiffer, I weigh 73kg, it initially came in a curve a

Feelings are mixed It seems that the chair is good, after my cabinet from the kitchen corner, which played the role of a computer chair for 3 years - a song)) I'm not sure if the manufacturer will read the review, but here it is. The assembly was terrible, the guys can’t make products like that. Okay, the discrepancy between the fasteners of the back to the bottom, indicating the screws M5 / 50 (in the instructions), but in reality M8 / 50 but there is no quality control. From the word at…

for a week of active use there are no complaints, everyone is happy. I absolutely can say that the best chair for the money. We were able to buy at a discount on 112022, it turned out 9500 at the usual cost of 10600. I read somewhere in the reviews that someone started to creak almost immediately: tighten the bolts normally and do not forget about the gaskets in the assembly kit, and it will not creak.

By design, I think it's not worth swinging. The set is complete, everything is packed in bags. Delivery was fast. I would give the real price at 6-7k Pros below: The design is good, the quality is 7 out of 10. rubberized wheels, iron cross. Clear instructions. For convenience, 7 out of 10. for people up to 100kg and height up to 176 will be more convenient Has some cons there is a question for a gas cartridge that has a backlash, not a completely even line. assembly requires skill during…

Purchased through Amazon. The chair is comfortable and easy to assemble. But the downside is that it doesn't come with all the accessories. The main parts were in place, but the little things, in the form of side plugs and lower screws for fastening the legs, were absent. And if the legs were still able to be screwed onto their screws, then without the plugs the chair looks not quite finished. Amazon could not solve the problem (and they tried). I tried to contact the Bureaucrat directly but…

Different pros: Nice and soft. Included are two sets of screws, as they wrote that sometimes something is missing. Good swing mechanism. Very comfortable chair Its cons: The vertical position is not the most vertical. A little bit missing

Judging by the comments, I'm lucky. I was prepared for a lack of bolts/washers. But everything came together. They were also scared that they couldn’t assemble it alone, but I myself assembled it alone easily! All holes matched, everything is ok. Overall, this chair is great! I like everything, except for his "non-softness" :D Yes, and the rocking chair shakes only if you push off with your feet, if you just sit leaning on your back, then it itself does not deviate.

I don’t know what exactly I expected to get for 9500 (with bonuses it cost 8.5), but definitely not a set-up with a cross and simply incompatible connectors. I have a video of unpacking and a photo of all of the above. If representatives are interested. Different pros: Comfortable, moderately soft, for my 185cm and 100kg very comfortable - subjective. Has cons: 1) Came with a plastic cross, although ordered with a metal one. 2) The bolts were stuck together with paint. 3) Two connectors in the

Bought from Ozone. There are no complaints about the chair, except perhaps only for * armrests. While collecting, swore. You need to assemble the armrests very tricky - insert the bolts in turn, then bait each a little, and then twist each one in turn. Why? Otherwise, they just won't fit. I had to unscrew and twist it back twice, applying considerable effort. One more time for assembly. The instructions do not say which armrest should go in which direction, but the armrests themselves have the…