Enhanced Performance H13 9008 Headlight SEALIGHT Upgraded: Unleash Powerful Illumination Review

I installed Sealight H13 LED headlights on my 2008 Dodge Caliber. They fit perfectly and were easy to set up in the frame for the perfect standard photograph. Significantly brighter than the new standard halogen bulbs, these bulbs produce a brilliant white color that better illuminates objects at night. My car needed a few resistors to work properly and turn off the blown bulb indicator. Stock comparison of low beam and high beam with LEDs as well as photos of the finished exchange card.

I have a 2006 Premium Mustang GT. The car looks much newer. These headlights emit a bright white beam that improves night vision. Easy installation, just take out the old ones and put in the new ones by simply twisting the bulbs. Tip (pay attention to the position on the original light bulb and adjust it when installed), because a tap is different. This is a win-win for me and my stang at a great price.

I have to reconsider my evaluation of these lights. after short circuit and failure with the first set in less than a year. Got a cheaper kit to replace, now less than 6 months later the replacement headlights are now doing the same thing, shorting out and going out at highway speed leaving me with no lights at all. Frankly, this is a safety issue and an obvious mistake in mounting the headlight. They are too expensive to buy new headlights in just 2 years. I personally ended up with this brand

Today I will review the SeaLight S1 Series H13 LED Bulb. This company does not pay me, but there is an agreement between both parties. This review is intended to educate people about this particular product and I do not claim to be a pro when it comes to LEDs. I bought these bulbs to replace my 2010 Ford F-150 and I was blown away by the updated look and performance so thought I'd give a review. These lights are also excellent for the commercial driving industry which I am proud to be a part of

Works well but daytime running lights don't work. I'm considering adding a canbus to bring them back or using an aftermarket DRL addon. Much better than standard halogen bulbs and no flicker for my car. Make sure to mount them vertically (the cable faces down when it snaps into the headlight socket). When installed upside down, the low beam shines upwards and dazzles oncoming traffic just like the high beam. Back and forth I left the subject alone. Well they insisted and offered to send me the…

These are nice and bright headlights on my 2013 Chevy Cruz. Installation was easy, pay attention to how they sync up, you need to locate the wires at the bottom of the radiator on the LED bulb. The LEDs should be in the 3 and 9 o'clock positions. The downsides I noticed were visible immediately after installation, I knew I had to sync them so it didn't really matter. But the plugs didn't fit properly or didn't want to go in at all. I definitely couldn't push the connector far enough for them to

These LED lights are a great upgrade for my 2018 F250 XLT which came with halogen bulbs. The brightness of these new lamps is impressive. After installing them in my high and low beams, I am buying 2 more for my fog lights. They're all the same lightbulbs, that makes it easy. The "hard" part was removing the grille to get to the headlights, but that's what you have to do. Then we remove the headlights themselves. Once they fail, it is very easy to replace the light bulbs. The only issue I had…

Used in 2012 Nissan Sentra. Installation was very easy and there were no problems. LED is a big improvement over 9 year old halogen. The light is bright white with no yellow cast. I just installed the product and did a short overnight trip so can't comment on reliability etc. I said the packaging was great for two things. First of all, it is recommended to wear gloves when installing to avoid getting finger oil, etc. on the lamp. Well, a pair of gloves was included in the box! Second, I believe

They require more explanation than in the copy. You want the bulbs to look at 9 and 3 o'clock after installation. I removed the 2 Phillips head screws on my H13, 2015 Cruze without a projector and rotated them so that when fully installed the lamp housing is vertical and the LEDs are at 9 and 3. Before I did this I had some headlight holes and bad bezel and a bit of light on the right bulb. Now I'm where I need to be. The cutoff is good, not as harsh as the Audi, but that's a $2,000 headlight…