💪 High-Quality 10-Inch Full Extension Ball Bearing Drawer Slides, Set of 10 Pairs - Supports up to 100 lbs Review

I am very happy with these drawer slides. They are very high quality and easy to assemble. I've used them to build a hardware cabinet that delivers a load of around 20-30 pounds per drawer that will run smoothly under those loads when loaded.

Installed in three wooden drawers with worn rails, center mounted, 1/2 inch space on each side, took about 5-10 minutes per drawer with a screwdriver. I want to have a T or Combo angle to make sure they are at a 90 degree angle to the drawer and frame. Sturdy enough for my needs.

Good sturdy drawer slides. I ordered two boxes and pre-drilled all the holes with one set. As soon as I took apart the first box, I noticed that the second box had sliders with a different hole pattern. So I had to go back and redrill half the holes, which was a lot harder since the cabinet was assembled. Make sure your order does not contain a mix of products.

They appear to be identical to the drawer slides sold at hardware stores and on specialized woodworking websites for 2-3 times the price. They come with mounting screws, but I had no problem attaching the slides to regular #6 screws, which I had to use for thinner drawers. These slides are designed for heavy use (and quite heavy), so the 22" size is perfect for kitchen cabinet drawers.

Yes, they come with mounting screws. Just draw a straight line and line up the holes. I use a center drill to make pilot holes. The thickness of each guide is 0.5 inch. So the drawers should be 1.1 inches smaller than the frame. easy to open. No No self-closing slider. The ball bearings slide easily and are super smooth. Top quality slides.