🔥 Efficient Self-Regulating Pre-Assembled Pipe Heating Cable: HEATIT JHSF1-CT 12-Feet 120V Review

Suitable for use on plastic and metal water pipes( including inlet pipe, drain pipe, sewer, palm tree frost protection, etc). Industrial grade self-regulating heating cable. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheating risk. More Safe. Can be used by straight, spiral and overlap. More functional. Fluoropolymer (One of the most heavy-duty plastic material) as the out jacket. Can be used underwater application. Please keep the connection (waterproof IP65) between the orange cold lead and black heating cable above the water. The black heating cable including end seal meets waterproof IP68. JHSF1-CT cables are configured for use in nonhazardous and hazardous locations, including areas where corrosives may be present. Protect pipes up to 2 1/2" in diameter. For better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material. Pre-assembled, Including grounded plug with light, easy to install and use without built in thermostat. 120 volt, 5 watts/ft at 50 degrees F for pipe freeze protection. Roof deicing application: Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs and so on. Rated 10W/ft at 32°F (0°C) for roof deicing. For roof deicing applications, you may need to buy clips and hangers separately. Testing the cable before the installation. Uncoil the cable, plug in the heating cable Normally you can feel the slight warm on the heating cable in few minutes.