🌀 Hengs Industries 90046-CR Vortex II Replacement Fan Kit (501.1099), White - High-Quality Air Circulation and Cooling Solution Review

My 2019 Jayco SLX7 195RBW didn't come with a bathroom fan. This 90046-CR from Heng is easy to swap out and installs in under an hour. Please note that it fits a standard 14" x 14" zip hole and as you can see in the attached photos it looks like an OEM after the trim has been replaced. Fan connection is easy; there is a light about 6 inches away that you can plug in to power the fan. I unplugged the light and routed the wire to the fan. This allowed me to connect the fan directly! Operation is…

Overall the Vortex II appears to be a decent fan. It's easy to install and moves air well. Being too loud I didn't have a fan in the existing vent, but luckily there was a 12v wire behind the skirt of the original vent for that purpose! Connections on the board where the rotary switch is mounted. These were low to medium speed connections. None of the lower speeds worked until I resoldered the connections. Very simple solution but shows somewhat poor quality in this area. The second problem was

The undeniable best thing about this fan is that you can fit it into your RV and you don't have to remove all the RV ventilation or disturb your factory roof seal. I installed my Heng's Vortex II in the living room of my motorhome, where no fan was installed. This was very easy as most (if not all) vents come with pre-drilled holes for mounting a fan. I connected the current from the 12-volt network in series to the next light. I have all the LED lights in my RV so they use little power. Before