🌈 Hippie Crafter Deep Pour Epoxy Resin Crystal Clear 3 Gallons Set - Ideal for DEEP 2"-4" Pours Review

This material is good for deep, detailed pouring. The slow cure and low viscosity helps fill tiny gaps and allows time for bubbles to escape without the use of a high-pressure pan. Although the treatment lasts up to 3 days. I'm not that patient so my next set will probably cure quicker. The low viscosity also means that the glitters I had fell to the bottom instead of staying in the mix. You also can't prevent different colors from mixing. I had a Nino mixing or diluting problem.

I just started casting resin jewelry and the first thing I learned is that resin is never enough! This Hippie Crafter Deep Pour Epoxy Kit is the answer. This 1.5 gallon resin and hardener kit provides enough resin for even the busiest hobbyist. A very nice feature is the very extensive product information and instructions for use that accompany this kit. There is a very detailed explanation on how to best use this product. This material actually has a dual purpose as a protective finish for…

Many of your epoxies will fully cure in 24-48 hours, but this one has a full cure time of 72 hours. So take this into account when scheduling shifts (if applicable). - Made in the USA, always happy to support American workers. As with all epoxies, it is best not to pour when COLD. The warmer the better, 75 or higher (the manual says 77), if you can do it at 80 degrees or higher I say do it, you'll only speed up the curing time. Mix it properly, it's 2:1 not 1:1 like some which probably…

I am very pleased with my order of Hippie Crafter Deep Pour Epoxy. This is an ideal epoxy resin formula for use in large casting projects. I use this resin to cast large pyramids that are used to make custom lamps. I still fill with layers but this does a great job. It cures slowly but also bubbles well and levels itself. I make sure to use it safely by wearing gloves, covering clothing, using goggles and my respirator. I mix, pot, and age in my garage since it's a well-ventilated space outside

This is a casting epoxy mixing kit. Unlike most craft resin mixes designed for casting resin, this mix has a 2:1 mix formula. You need to mix 8-10 minutes instead of 3-5. It is very runny and thin and stays that way for several days. That is, hours worked are measured in days, not minutes. The minimum temperature to cure is 70°F. I have found this resin to work for some resin moldings but you will need a lot of patience for it to cure. This resin is definitely for casting countertops and bars…

So I can't blame him for what he does. It is manufactured and listed as a slow-curing resin, mainly because of its deep castability, meaning that faster-curing resins will generate too much heat with the amount of resin you intend to use. So you have to make sure that when you get it, you keep it in mind, and not just because it's a large amount. As long as you're buying it for large quantities like tables, countertops, etc., this is a great deal from Hippie Crafter. If you take care of it…