🔌 iJDMTOY H11 880 890 Relay Wiring Harness for Enhanced Compatibility with Xenon Headlight Kit, Fog Lights Add-On, LED Daytime Running Lamps and More Review

I was hoping it would work but after plugging it into the car to power both headlights it started to oscillate as if there was AC power. Must be a bad block out of many, I'll return it and try another. The length and size of the cables are good, I have LED headlights.

I replaced the old wiring harness on my Lancer and it works but the wires are very short which makes the job difficult. I wish the wires were longer so the relay could be installed better. I combined this with an extra fuse for my fog lights to work with my headlights so it did what I needed it to do.

This relay harness did what it was supposed to do. Fixed an issue where my passenger light would not always come on. It was completely plug and play. I deducted a star because the length of the cable is too short to route well in my Silverado. I had a choice: tie the banjo wire or add more wire.

Really good pendant. Ordered it BC Didn't realize my fog lights come with their own wiring harness and switch. There is no switch in this harness, I believe it is for connecting to the battery fuse, which is fine if you want the fog lights to turn on when the car is started. The wiring harness isn't really long enough to reach the switch in the cab, so maybe hook it up to a headlight as a source.

It fits my 2k mustang well and there was room next to the horn to mount the relay and all the correct length cables. No relay bracket was included, I replaced the relay with a "mountable" relay. The wiring was easy and I hooked it up to the IGN circuit as a daytime running light, didn't need the switch and got my insurance money back every year. If they included a relay mount I would add another star.

My wife's 2015 Dodge Charger would not accept LED or HID bulbs and the car cut power. until I bought this cable set and can now install what I want, I was a bit skeptical at first because I didn't think that the high and low beam would work, but they also work with the cable set that the ground cable should have was 6 inches too long, had to I cut and spliced some extra wire to make it work, but other than that I'm happy with the wire set.

I've used this harness in a 55w HID setup and it's been great so far. Very easy to install compared to a standalone system. I installed it on a Scion XD and there were plenty of cables to wire it up to keep it looking professional and whimsical. The other harnesses I've used fit the battery side just fine, but you have to stretch to get to the opposite side. I didn't have a single problem with the installation, in fact I installed it in about 10 minutes.

I wish the wires were longer, the wires are so short I basically had to cut all the wires to add an extension to them so they would reach my lighting around connect everything else to make it work. It is always better to be a little longer so that it can be hidden or clipped. People buy kits so they don't have to buy an extra wire and I bought this for a Saturn Ion and it's a compact car to hook up fog lights and those wire kits are too short to do anything without adding more wires cut and…