🔵 iNextStation Blue LED Strip Light: Battery & USB Powered, Waterproof, Cuttable (200cm) Review

They are blue. You are 5v. They are bright enough for my purposes. I need to remove the weather protection, but it's very easy.

This product does not work very well when switched on, it looks good. But after a few minutes of turning it on, the light turns red and starts dimming until it turns off. Not the best product.

I made this into a light pole for my recumbent bike. The solder joint between the battery pack and the strip is very fragile. I broke it pretty quickly but I was able to re-solder it and protect it with clear heat shrink tubing. It's really bright and works well for my application.

I only ordered 6 of these and only 2 worked. The other 4 had the remote on backwards and the lights didn't work unless you left them on backwards. I then ordered 4 replacements and all 4 had the same problem as the first ones I received. I sent them back too. Now I have 2 that worked and the other 4 I gave up.

As per other reviews, these died on arrival. So why did I buy them. The project I'm working on doesn't require LEDs on waterproof tape. I cut them off and solder the wires directly to the LED terminals. The LEDs work fine (with the necessary resistors), only the current paths (connectors) on the bar are defective.

They are blue. You are 5v. They are bright enough for my purposes. I need to remove the weather protection, but it's very easy.

This product does not work very well when worn, it looks good. But after a few minutes of turning it on, the light turns red and starts dimming until it turns off. Not the best product.

I used this to make a lamp post for my recumbent trike. The solder joint between the battery pack and the strip is very fragile. I broke it pretty quickly but I was able to re-solder it and protect it with clear heat shrink tubing. It's really bright and works well for my application.