🔥 inRobert 88mm T129215SU Graphics Card Cooling Fan Replacement for Gigabyte GTX 1050 Ti RX 480 470 570 580 GTX 1060 G1 Gaming Cooler - Top Performance Cooling Solution Review

This is an exact (including the brand - everflow, they didn't even have an inRobert sticker on top of the brand) replacement fan on my Gigabyte GeForce GTX 1070 WINDFORCE OC video/video card (GV-N1070WF2OC-8GD). The only exception: the two fans rotate in opposite directions. The originals were rotated in the same direction. Temperatures were >84 C under minimal load with no fans and are now at a low 50s under load and 66 C under MSI Afterburner FurMark. Hooray!

Perfect fit, very easy to install. Remove the 4 screws from the 4 corners of the card (circled in red in the photo) and the fan assembly comes out. Be sure to disconnect the 4-pin connector. Once free, screw each fan through the blades with a small screwdriver. Install an identical new fan with the same blade orientation/direction. Carefully remove the wires from their sockets in the frame. Run one fan at a time to make locating the wiring harness easier. YES YOU WANT TO REPLACE BOTH FANS IF…

I installed them on a Gigabyte RX 580 whose standard fans died after about 2 months. They've already outlived the standard fans that come with the card. Yes, I could return the card, but have you ever done this with an ATI/AMD card? LOL Yes, 4 to 8 weeks later you get the card back with the same cheap fans that died in 8 weeks! I received these fans in 1 day, took 10 minutes or less to install, with a total downtime of ONE DAY, not 8 weeks. Great fans, easy to install, about the same noise…

As other reviewers have complained and what I should have considered, these fans are noisy. The exchange was easy, they were silent for several weeks, and now they start making noise when both rev up. Unfortunately, I replaced the noisy fans with loud ones.

The fan started making noise a day after installation. Still spinning, but you can hear the cracking of the bearing throughout the room.

Purchased and installed on a Gigabyte GTX 1060 card. play while turning it down. So basically this fits perfectly, but it looks like it needs to be replaced again due to bearing or bushing damage.

Fans brought my old MSI RX 480 8GB back to life. I almost went with the 580 for this build but luckily the fans work great. One of the older fans stopped spinning smoothly and was difficult to spin with a finger.

I bought these fans for a gigabyte Nvidia GTX 1060 3gb (bought about 4 months ago). The original fans started making a resonant hum at about 70% fan speed after 1 month and I couldn't take it lol. These replacement parts have worked just as well and now last longer than the original fans. HOWEVER the part numbers do not match, the replacement parts are 1 year older than the fans that came with my GPU. I think it's no big deal. Мне кажется, что у него немного меньше оборотов в минуту, но я не…