🚰 iSpring WGB32BM Replacement Filter for F3WGB32BM Review

Filter just fine. They are not easy to install, not the fault of the PTR, but the fact of their appointment and use. The filter canisters are filled with water (unless you have a drain valve and they will drain through a 1/8" hole forever) and the filters inside are equally filled with water, filtering out any contaminants that settle in the water were. As a result, they are heavy. The O-ring may break when unscrewing the housing, but that's not the filter's fault.

Amazing filter system. I'm on my second round of filters, had to change after about 5 months. I was so concerned about how black my sediment and charcoal filters were. We live in the suburbs and I can't believe the city water is so dirty. We are so happy we bought from ispring and on top of that they have great customer service. I've added some photos of the new filters alongside the old ones, note they should be white! I highly recommend!

We did notice a slight drop in pressure through the iron and manganese filter, but this far outweighs the beautiful, clear, flavorful water! Doesn't matter! We're at the well. We sent a water sample for analysis. Water analysis ensures your water is free of harmful microbes! That's an $800 investment! Well laid out! Mom is happy! I'll see how the white garments hold up through the wash as our white garments started to turn white! Then we opt for softer water.

Just replaced old filters and added new filters. I installed this 3 stage system about a year ago and since then I have noticed a significant reduction in limescale build up on my shower heads and a significant reduction in the ring around the toilet and sink. This year I added a lead filter instead of a third carbon filter. So far so good, very happy with the purchase of the ispring filtration system and its filters. It does the job. By the way, my house gets its water from the village's well…

I was really hoping this would save my iron. It's not like this. My iron did not dissolve. I put in 1 micron instead of the 5 microns that originally came with this kit. It increased my iron from 3ppm to 0.5ppm. This worked for about 2 weeks when we were working part time. Maybe 1000 gallons (I have a water meter). I chose a similar filter from Pentair and then a 0.5 micron carbon filter, also from Pentair. The Pentair installation has now been up for a month and has eliminated the hardware…

I live in remote interior Alaska and thought bad water was just a sacrifice we have to make to live in this little slice of paradise. After 8 years of using dirty water from our well over 400 foot depths, I almost cried over the clean drinking water I got with these filters. In April, 4 months ago we installed an APEC filtration system to try to clean our dirty well water but to no avail. After spending about $500, our water didn't improve noticeably, with solids over 700. The water still had a

I have been using the iSpring Whole House Filter set for many years. I recently ordered another set. This company has fantastic customer service. After installing a new filter set I encountered a low pressure problem on the filtered side, the pressure was normal on the unfiltered side. I'll double check that I installed the filters in the correct order. I wrote to iSping support about the problem. The very next day, Nick contacted me and said that iSpring would send me a new set of filters as…

Our water had a specific odor that was completely removed. It takes the smell out for 5 months so I now change the charcoal filter every 4 months. I did an extensive water analysis and, given our iron levels, water usage rate and filter data, decided that an iron cartridge should suffice. a year and it worked. Before this iron filter I had to treat the water heater every 2-3 months to get rid of iron bacteria but with this iron filter it lasted a year without hydrogen peroxide treatment. Our…