📼 GLW JVCC LLGRN0510 Converting Tape Review

JVCC GLW Glow in the Dark Tape is a flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims, and special effects. Used in hotels, hospitals, schools, public facilities, office buildings, and manufacturing plants. JVCC Glow in the Dark Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest the first 15 to 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night-adjusted eye for up to 6 hours. The tape has excellent UV stability and does not show significant degradation when used outdoors. The luminescent system used is non-radioactive and non-toxic. Carrier/Backing: laminated photoluminescent polyester film. Adhesive: solvent-based acrylic. Release Liner: poly-coated paper. Thickness: 20 mils (carrier, adhesive, liner) 15 mils (carrier, adhesive) 5 mils (liner). Adhesion: 72 ounces per inch (to stainless steel test panel). Tensile Strength: 30 pounds per inch (longitudinal). Application Temperature: 50F (minimum). Core: 3-inch diameter neutral.