⚙️ Jabsco Service Kit (37045/245) 90197-0000: Ultimate Solution for Efficient Maintenance Review

O-ring is too big, doesn't fit as intended, other parts of the working toilet are still leaking. I'm looking for a different O-ring. waste of money.

Useful kit. I have serviced my boats several times with these kits. BUT this large O spacer is too big and won't fit the groove in the toilet.

The kit was a good price and arrived quickly. The o-ring didn't quite fit my silent flush head, but I finally managed to get it to work (it was a slightly larger diameter).

Two of the 4 joker valves were defective leaving debris in the drum. I tried to contact Jabsco but didn't get a response. Two bad blocks returned.

If you need to replace the gaskets in your Jabsco electric flush toilet then this kit is for you. If you notice water leaking from the chopper pump you will need this kit to get a small shaft seal. I recommend you replace the shaft seal as soon as you see water coming out of it, otherwise it will get into the pump motor and you will end up buying a new motor. How should I know - because it happened to me. I also recommend you take the time (and effort) to replace the joker outlet valve with the

I resealed my Jabsco electric head a few years ago and it recently started leaking within seconds of flushing. The device is rarely used. I got this kit because it looked like I only needed the gaskets. The impeller worked great. When I removed the pump I found that the gasket supplied was for the motor side of the impeller housing and the kit did not include a gasket for the wear plate. I've looked at everything and it doesn't look like you can, but the wear plate gasket itself is something…