🚗 Upgrade Your Ride with JDM ASTAR PX Chips: Super Bright Amber Yellow Turn Signal LED Bulbs for 7440 7441 7443 7444 Models Review

Much brighter than incandescent bulbs. As they are about 2.5 cm longer, make sure you have enough space in the lamp housing. I have yellow lenses and these yellow bulbs look better than the white LED bulbs. Bright white LED lamps appear pale yellow through the lens. I had to replace the flasher relay with an electronic one that works with LED and incandescent bulbs. I found a fork-compatible relay on eBay for $20 that was easily swapped out on my bike. I strongly recommend replacing the flasher

I installed these as front turn signals on a 2019 Toyota Tundra. While the headlights are LED, there are no turn signals, and they're almost invisible in daylight and easily drowned out at night when they're next to the LED headlights. They should be at least twice as bright and easily visible from afar, even on a bright sunny day. I've only had them for a week so can't say how long they will last, I'm hoping to get a few years out of them. Going back to regular lightbulbs is not an option. I…

I was hoping for this amber color as my stock turn signal lenses are clear. Well, they're more yellow than amber, but they're vibrant. The bulb is too long for the reflector in the rear lights. I didn't try to install from the front because of work. (Unfortunately @nissan's electrician geniuses didn't leave much leeway to cut and add resistors to prevent excessive flickering at the front. - personal issue) Someone had bad luck with these bulbs and a not-so-smart person decided to send them to…

I ordered these lights in April 2018 and they worked as advertised with very bright light output, no flicker etc. However after 9 months one of the lights failed and caused an intermittent hyperflare. After troubleshooting (checking contacts, wiring, changing another bulb on the right and left side) I found that the bulb had burned out. A quick call to JDM Astar who confirmed my order (within the 1 year warranty) and attempted to rectify faults and a replacement was dispatched within 2 working…

Having blown signal and tail light fuses in a Toyota with non-CK bulbs in the past, I was concerned I would have to rewire them if I got them. I started taking their base apart to make sure the wiring wasn't shorting out my fuses and was surprised at how much glue was used to cover these bulbs, which was very different from the previous LED bulbs I've had in the store bought. past. Once inside, I found that each pin goes to the board independently and doesn't share a common ground pin like…

I installed these front and rear turn signal bulbs on my 2016 Nissan Altima. I have a B model with LED headlights and LED daytime running lights. They are as advertised. They are very light and have a beautiful amber color. Darker amber than 7444na bulbs. Some buyers state that you need terminators in either the front or the back, but not both. It is not true. You need one per bulb so 4 resistors are needed front and back. Be sure to screw the resistors onto the metal bracket and away from any…

Ordered Saturday 28th February arrived Monday 2nd March from California to Florida in 2 days. The installation went without any problems, parking sensors and turn signals work on both lamps. The LED bulb is about 1/2 inch longer than the incandescent bulb. I was concerned about having enough space for them, but no problem. Amber is not as dark as an incandescent lamp. The photos show the bulb on the passenger side, the new LED on the driver's side. Update: I noticed that when the turn signal…