🚘 Revolutionize Your Car Audio: JENSEN JENAUX USB/Aux Audio Input Jack Review

Many more cables than you need. The company could probably save money and use 1/4 length. But works great and looks great on my boat.

I like this side of the mount but the current for the USB cable drops a lot. I shortened the cable to help and found steel wires inside, no wonder.

I added this to the HD1BT radio but every time I used the USB port 2 songs played and stopped and the audio port worked at all Not . The USB cable on the radio was working fine when I unplugged that cable.

Good way to charge my phone on the boat, good iPod input jack too. I installed it above my navigation station so it would be in a very convenient location. I go down the ladder and it's right there. The stereo has Bluetooth and I usually play it through my phone, but it would be nice if someone came on board with an iPod full of music.

Built for the boat. Very well sealed. both internal and external. Need a 1-1/2" hole saw for the unit and extra room for the nut to tighten on the back, so leave about 2" of clearance behind the bushing. I have the main unit in the top electronics box on my boat so the connection cable needs to be long enough to reach my console through the t-top tubing. That. A 10 foot cable is sufficient.

Upon receipt I double checked my order to make sure I ordered the plus size version. I didn't have it - it's just a little bigger than it looks in the pictures online. This isn't necessarily an issue if you don't have enough mounting space (and free space behind the mount since the headboard is nearly 2.25 inches deep). The mounting hole should be about 1.5" in diameter and the outer frame should be about 2" in diameter. Even the wires are large - both in thickness and length. They easily reach

Designed for boats. Very well sealed. both internal and external. Need a 1-1/2" hole saw for the unit and extra room for the nut to tighten on the back, so leave about 2" of clearance behind the bushing. I have the main unit in the top electronics box on my boat so the connection cable needs to be long enough to reach my console through the t-top tubing. That. A 10 foot cable is sufficient.

Place this on our pontoon with remote audio/USB. The boat came with a broken USB port (nothing could be plugged in). It was actually cheaper and easier to order it from Revain than to tow the boat to the dealer. Ask them to look at it, order the part, and then pull it back in for installation. It took 15 minutes to install as the hole the original came out of was slightly smaller than this one. A simple sanding drum on a Dremel quickly solved this problem. It easily connects to the rear USB and

Upon receipt I double checked my order to make sure I ordered the large version. I didn't have it - it's just a little bigger than it looks in the pictures online. This isn't necessarily an issue if you don't have enough mounting space (and free space behind the mount since the headboard is nearly 2.25 inches deep). The mounting hole should be about 1.5" in diameter and the outer frame should be about 2" in diameter. Even the wires are large - both in thickness and length. They easily reach…