JEYI Copper HeatSink Passive Heatsinks Review

Tried Archgon, EK and other brands with small fan, each heats up to over 65C during CystalDisk. This stays under 60C (59). Your mileage will vary but I am using an SN850 2TB (which is heated) in T1 form. Maybe not much, but every degree counts. I definitely love the finish of the copper fins!

Not suitable for PS5 but seems better than other options as this heatsink is real copper and also looks better than other options. Worth a try.

Purchased to cool the Samsung 980 Pro 1TB m.2 expansion in Playstation 5. It's not a problem if you don't mind not using a metal pad. Unlike the Sabrent rocket cooler, this one fits. It seems pretty solid and looks good, although you can't see it in the game console. I only gave it 4 stars because of the lack of instructions. I put the skin-colored pad on the bottom panel and the double-sided bluish pad on top. I can't speak about its effectiveness as the PS5 doesn't tell you the storage…

It's a simple concept, large surface area with copper fins, it does its job well and looks good. I had a heatsink/splitter provided by my Gigabyte B550 Gaming Elite motherboard and it showed that it was cooling my Crucial P5 1TB SSD, but it was also hotter than expected. I ordered this heatsink and upon removing the Gigabyte provided heatsink I found that there were only two points of contact with the NVMe block, on the chipset and on the back of the chip. This shows that the block provided by…

For reference I am using it with a Firecuda 530 on a TUF X570 board. Because the heatsink wraps around the SSD, it adds a bit of width. In my case it almost got caught on the PCIe slot latch. The copper is beautiful and the fit is great. Not sure how the metal will look over time, it looks great now. The included heating pads are a little confusing at first as I didn't see an explanation of the colors. The blue actually sticks to the surface and works best between a copper sink and an SSD. The…

Received today and immediately installed on my PS5. It was very easy to install. If you've watched videos online of how to do this, you should be able to figure it out. The reason it gave 4 stars and not 5 is because it's too big when you're sitting in a PS5. It works and works fine, but the aluminum dust cover touches the copper fins. You can still attach the dust cover, but it fits very snugly, and the flip cover that holds one end of the PS5 needs to be bent a bit. If you don't want to go…

Purpose: Reduce controller temperature by maintaining Nand Flash temperature during recording. Test: I used Samsung Magician to run the benchmarks and heat up the nvme drive. HWinfo was used to check the temperature of the controller. The thermal pad has been cut in half to ensure it only touches the controller and drum. There was no thermal pad on the NAND chips. Conclusion: I prefer the Jeyi Q150 Digifast for my use case. The controller stayed cooler in all tests. Digifast looks better in…