📺 Kanto F3760 TV Wall Mount for 37-inch to 70-inch Televisions - Fixed Mounting Solution Review

It may be a little pricey, but it's worth every penny. It's a very low profile, which is exactly what I wanted. Make sure you have everything connected before putting the TV on top of the TV. Wall because you don't have enough space to work. The build quality is excellent, I'm not worried it will fit my 85 inch TV without any issues.

I needed a wall mount that could snap onto a couple of studs. The stock mounts ended up being about 28-30 inches long so they couldn't cover 2 posts on the particular wall I was mounting to. This one crossed 3 bolts to securely mount my 82 inch TV. The profile is also very close to the wall, so when viewed from the side it hides most of the cables and mounting hardware.

First of all, this is a very large cabinet. I used it to hang my 85" song which was no problem at all. A bit pricey but I needed a bracket where I could level the TV after installation. This did the job perfectly! The only fake was that the Cables to separate the TV from the wall were loose. I ended up removing the metal clip and tying a knot on the cord at the desired length. I didn't want to risk pulling on the cord. once it was installed and I did couldn't get it off the wall, not a big deal

We installed a 75 inch panel from Samsung using this mount and are very happy with the results. The panel is placed as close to the wall as possible, but at the same time there is enough space to remove all HDMI, USB and Toslink connectors. and power cords routed through the wall cavity. The Samsung ARC HDMI connector was not recessed into the cavity like all other connectors, so the right-angle HDMI adapter made it as flat as possible. Due to the small gap that the mount provides, to make sure

I was looking for a flat TV mount that lays as flat against the wall as possible. in the middle of the wall. I liked the easy centering feature, allowing you to move the TV horizontally left or right after installation. With 2 cords you can remove it if needed like I did when painting the walls. It's pretty easy to tuck the cords behind the TV. The only improvement I would suggest is a couple of metal loops on the right and left sides so you can tie the wires to something to plug them in. In…

We installed a 75" Samsung panel with this bracket and we are very satisfied with the result. The panel is as close as possible to the wall, but at the same time there is enough space for all HDMI, USB - and Toslink connectors removed. and power cables routed through the wall cavity. The Samsung ARC HDMI connector was not recessed into the cavity like all the other connectors, so the right angle HDMI adapter made it as flat as possible. Due to the small gap, that the mount offers, I suggest…

I was looking for a flat TV mount that lays as flat against the wall as possible. I liked the easy centering so you can move the TV horizontally left or right after installation. The only improvement I would suggest is some metal loops right/left so you can tie the wires to something to hide them. Cables out of sight This is in my master bedroom so when you enter the room you can see the cables behind the TV etc. But it worked fine.

I ordered 3 of these Kanto F6080 TV mounts to mount an 80" and two 70" Sharp LCD TVs. Lateral adjustment for large screens - Close to wall - Can hit 3 16" center studs - Close to wall - Feels tight to a sharp ridge and noticeably thinner than metal - Standoffs are thin to medium deep which makes it difficult when not makes it impossible for the bottom of the monitor not to rest against a wall - Washers come in two sizes If your monitor uses larger mounts, none of these are left for wall plugs -