💡 KATANA H7 LED Bulbs - Adjustable Beam Design - 12000LM 72W 6500K Super Bright Conversion Kit (Pack of 2) - Halogen Replacement Review

This review is for a 2015 Genesis Coupe in the high beam position. The katana bulb fits perfectly, but yes, you'll need a Hyundai H7 adapter to fit properly (or if you're creative with zips, you can attach it like this). I also had to use a dremel to cut through the bottom of the dust cover and the edge of the case itself for the wiring for the connector and driver as none of this would fit. The Mine Genesis came with HID low beams and halogen high beams. With the driver, there is no LED…

I bought these for Cadillac CTS-V. I switched to base model headlights because I was tired of replacing HID ballasts. First I tried 5th generation Rolinger LEDs. They're only rated for 20 watts per bulb, so the light output was unsatisfactory. It was dull and had dark spots. I then replaced them with 40w automotive LEDs per bulb because I was happy with the ones I put in my wife's SRX. Unfortunately, they were the same as previous LEDs. So I decided to do some real research and found many…

Alpharex projector bulbs bought for my 2016 f150. They were put on the near and high beam. You were right, but they fit perfectly under dust covers. The brightness paired with these headlights is phenomenal. I've had Anzo headlights with Hikari bulbs for big bucks that were ok but not great. These are MUCH better. My only complaint is that the dollar the bulbs snap into isn't very reliable. When you twist the bulb it's nice to adjust, but I'm a little worried it might fall out over time. The…

Installed on my 2012 Ram with 2019 AlphaRex/ModifyStreet Style Projector Headlights. Even if the projectors aren't "real" projectors and are designed for halogen lamps, they do their job quite well. As for these LED bulbs, the color is around 6000K and the brightness is the same as my Morimoto 35W XB 6500K HID kit. But these LED bulbs don't give enough light in future compared to 35W HID kit, but the color and instantaneous brightness for the first 20ft is the same as HID kit. The bulbs look…

Boy am I impressed. I tried another brand in my Hyundai Tucson and it didn't work very well. With this kit, it's almost as good as plugging an HID into a projector body. The line trim is sharp and after a small adjustment (turning the bulb about 20%) the hotspot is perfect. No CanBus error or flickering when car is on/AC only/off. However, I am a bit concerned about how hot they get in the sealed headlight housing. I will update if this gives me problems. I wanted the LEDs to stay on…

I bought these bulbs to replace low beam projectors in some aftermarket cases for my F150. Overall, I really like these replacement devices. They're a lot brighter than the halogen bulbs I had, and since the projector bulbs are semi-dimmable, they don't blind oncoming drivers. I had a problem installing it as the photos show the lamp housing didn't fit the hole in my headlight housing originally. An LED module is simply much larger than a halogen lamp. I was able to enlarge the hole with a…

I have been a passionate car lighting enthusiast for a number of years and when my partner and I rented our new car she insisted on replacing the headlights. The new car had terrible halogen headlights and she didn't feel safe driving at night. I searched and searched and after buying 3 other brands from $30 to $80 these katanas were by far the best. I hate to admit it, but I'm impressed! I have done several HID/LED modifications, i.e. converted vehicles with OEM halogen lighting systems to…

**** TIPS *****• Keep the original halogen bulbs in case they are needed for warranty purposes in the future • Keep the barcode sticker with yours Case LEDs on . ****** Update ****** BIG SUPPORT! ********As I said. I have owned these lights for 1 year and unfortunately one of the LED chips on one side of the LED has decided to remain permanently dimmed. These LEDs usually come with a 1 year warranty, but some manufacturers like to get around this by not sending you a replacement. I'm happy to…